This file contains any messages produced by compilers while running configure, to aid debugging if configure makes a mistake. It was created by The XMM-Newton Science Analysis System configure 21.0.0, which was generated by GNU Autoconf 2.69. Invocation command line was $ ./configure --enable-sharedversion --enable-user --disable-optimization --enable-debug --enable-sloppy ## --------- ## ## Platform. ## ## --------- ## hostname = xmac01n.iuser.lan uname -m = x86_64 uname -r = 20.6.0 uname -s = Darwin uname -v = Darwin Kernel Version 20.6.0: Mon Aug 29 04:31:06 PDT 2022; root:xnu-7195.141.39~2/RELEASE_X86_64 /usr/bin/uname -p = i386 /bin/uname -X = unknown /bin/arch = unknown /usr/bin/arch -k = unknown /usr/convex/getsysinfo = unknown /usr/bin/hostinfo = Mach kernel version: Darwin Kernel Version 20.6.0: Mon Aug 29 04:31:06 PDT 2022; root:xnu-7195.141.39~2/RELEASE_X86_64 Kernel configured for up to 20 processors. 10 processors are physically available. 20 processors are logically available. Processor type: x86_64h (Intel x86-64h Haswell) Processors active: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 Primary memory available: 64.00 gigabytes Default processor set: 619 tasks, 1985 threads, 20 processors Load average: 2.91, Mach factor: 17.08 /bin/machine = unknown /usr/bin/oslevel = unknown /bin/universe = unknown PATH: /Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/latex2html/bin PATH: /Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/texlive/bin/universal-darwin PATH: /Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/tiff/bin PATH: /Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/netpbm/bin PATH: /Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/libtool/bin PATH: /Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/libpng/bin PATH: /Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/lesstif/bin PATH: /Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/jpeg/bin PATH: /Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/grace/bin PATH: /Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/qt-x11-free/bin PATH: /Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/fftw/bin PATH: /Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/automake/bin PATH: /Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/autoconf/bin PATH: /Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/tar/bin PATH: /Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/sed/bin PATH: /Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/make/bin PATH: /Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/ghostscript/bin PATH: /Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/findutils/bin PATH: /Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/coreutils/bin PATH: /Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/wcstools/bin PATH: /Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/ds9/bin PATH: /Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/perl/bin PATH: /Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/headas/architecture/bin PATH: /Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/gcc/bin PATH: /opt/X11/bin PATH: /usr/local/bin PATH: /usr/bin PATH: /bin ## ----------- ## ## Core tests. ## ## ----------- ## configure:2864: checking for cut configure:2880: found /Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/coreutils/bin/cut configure:2892: result: yes configure:2906: checking for whoami configure:2934: result: yes configure:2948: checking for strings configure:2976: result: yes configure:2990: checking for awk configure:3018: result: yes configure:3032: checking for head configure:3060: result: yes configure:3136: checking whether make sets $(MAKE) configure:3158: result: yes configure:3207: checking build system type configure:3221: result: x86_64-apple-darwin20.6.0 configure:3241: checking host system type configure:3254: result: x86_64-apple-darwin20.6.0 configure:3274: checking target system type configure:3287: result: x86_64-apple-darwin20.6.0 configure:3606: checking for tsort configure:3634: result: yes configure:3651: checking for gmake configure:3684: result: no configure:3651: checking for make configure:3669: found /Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/make/bin/make configure:3681: result: /Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/make/bin/make configure:3696: checking whether you have GNU make configure:3705: result: yes configure:3714: checking for gtar configure:3747: result: no configure:3714: checking for tar configure:3732: found /Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/tar/bin/tar configure:3744: result: /Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/tar/bin/tar configure:3759: checking whether you have GNU tar configure:3768: result: yes configure:3777: checking for gfind configure:3810: result: no configure:3777: checking for find configure:3795: found /Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/findutils/bin/find configure:3807: result: /Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/findutils/bin/find configure:3822: checking whether you have GNU find configure:3831: result: yes configure:3841: checking for gar configure:3874: result: no configure:3841: checking for ar configure:3859: found /usr/bin/ar configure:3871: result: /usr/bin/ar configure:3887: checking whether you have GNU ar configure:3897: result: no configure:3899: WARNING: Warning: This is not GNU ar. configure:3910: checking for gzip configure:3928: found /usr/bin/gzip configure:3940: result: /usr/bin/gzip configure:3961: checking for mkdir configure:3979: found /Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/coreutils/bin/mkdir configure:3991: result: /Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/coreutils/bin/mkdir configure:4018: checking whether your environment sets CPATH configure:4026: result: yes configure:4044: checking whether your environment sets C_INCLUDE_PATH configure:4052: result: yes configure:4056: WARNING: C_INCLUDE_PATH is ignored! Use CPATH instead configure:4074: checking whether your environment sets CPLUS_INCLUDE_PATH configure:4082: result: yes configure:4086: WARNING: CPLUS_INCLUDE_PATH is ignored! Use CPATH instead configure:4115: checking whether your environment sets LIBRARY_PATH configure:4123: result: yes configure:4170: checking whether your environment sets DYLD_LIBRARY_PATH configure:4178: result: yes configure:4200: checking whether your environment sets PERL5LIB configure:4208: result: yes configure:4227: checking whether your environment sets PERLLIB configure:4235: result: yes configure:4254: checking whether your environment sets PYTHONPATH configure:4262: result: yes configure:4281: checking whether your environment sets TEXINPUTS configure:4289: result: yes configure:4308: checking whether your environment sets BIBINPUTS configure:4322: result: no configure:4337: checking whether your environment sets LHEASOFT configure:4345: result: yes configure:4369: checking whether your environment sets HEADAS configure:4377: result: yes configure:4396: checking whether your environment sets FTOOLS configure:4404: result: yes configure:4426: checking whether your environment sets PGPLOT_DIR configure:4434: result: yes configure:4460: checking for fversion configure:4476: found /Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/headas/architecture/bin/fversion configure:4487: result: fversion configure:4511: checking that FTOOLS is version 6.0 or better configure:4516: result: (6.30.1) yes configure:4536: checking for xmgrace configure:4552: found /Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/grace/bin/xmgrace configure:4563: result: xmgrace configure:4591: checking for xmgrace configure:4609: found /Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/grace/bin/xmgrace configure:4621: result: /Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/grace/bin/xmgrace configure:4641: checking for gracebat configure:4657: found /Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/grace/bin/gracebat configure:4668: result: gracebat configure:4695: checking for ds9 configure:4711: found /Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/ds9/bin/ds9 configure:4722: result: ds9 configure:4740: checking for xpaget configure:4756: found /Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/ds9/bin/xpaget configure:4767: result: xpaget configure:4817: checking for gfortran configure:4833: found /Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/gcc/bin/gfortran configure:4844: result: gfortran configure:4859: checking for gfortran configure:4877: found /Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/gcc/bin/gfortran configure:4889: result: /Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/gcc/bin/gfortran configure:4901: checking the version of gfortran configure:4904: result: 9.5.0 configure:4911: checking whether the version of GNU Fortran is higher than 5 configure:4920: result: yes configure:4922: Support to Fortran 2003 is assured (e.g. IEEE_ARITHMETIC) configure:4927: checking the path to gfortran configure:4930: result: /Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/gcc configure:5047: checking for gcc configure:5063: found /Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/gcc/bin/gcc configure:5074: result: gcc configure:5105: checking for C compiler version configure:5114: gcc --version >&5 gcc (GCC) 9.5.0 Copyright (C) 2019 Free Software Foundation, Inc. This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. configure:5125: $? = 0 configure:5114: gcc -v >&5 Using built-in specs. COLLECT_GCC=gcc COLLECT_LTO_WRAPPER=/Volumes/SAS/sasbuild/local/macOS11/GNU_CC_CXX_9.5.0/gcc_9.5.0/bin/../libexec/gcc/x86_64-apple-darwin20.6.0/9.5.0/lto-wrapper Target: x86_64-apple-darwin20.6.0 Configured with: ../gcc-9.5.0/configure --prefix=/sasbuild/local/macOS11/GNU_CC_CXX_9.5.0/gcc_9.5.0 --with-local-prefix=/sasbuild/local/macOS11/GNU_CC_CXX_9.5.0/gcc_9.5.0 --enable-checking=release --enable-languages=c,c++,fortran --disable-multilib --with-native-system=header-dir=/usr/include --with-sysroot=/Library/Developer/CommandLineTools/SDKs/MacOSX11.sdk Thread model: posix gcc version 9.5.0 (GCC) configure:5125: $? = 0 configure:5114: gcc -V >&5 gcc: error: unrecognized command line option '-V' gcc: fatal error: no input files compilation terminated. configure:5125: $? = 1 configure:5114: gcc -qversion >&5 gcc: error: unrecognized command line option '-qversion'; did you mean '--version'? gcc: fatal error: no input files compilation terminated. configure:5125: $? = 1 configure:5145: checking whether the C compiler works configure:5167: gcc conftest.c -L. >&5 configure:5171: $? = 0 configure:5219: result: yes configure:5222: checking for C compiler default output file name configure:5224: result: a.out configure:5230: checking for suffix of executables configure:5237: gcc -o conftest conftest.c -L. >&5 configure:5241: $? = 0 configure:5263: result: configure:5285: checking whether we are cross compiling configure:5293: gcc -o conftest conftest.c -L. >&5 configure:5297: $? = 0 configure:5304: ./conftest configure:5308: $? = 0 configure:5323: result: no configure:5328: checking for suffix of object files configure:5350: gcc -c conftest.c >&5 configure:5354: $? = 0 configure:5375: result: o configure:5379: checking whether we are using the GNU C compiler configure:5398: gcc -c conftest.c >&5 configure:5398: $? = 0 configure:5407: result: yes configure:5416: checking whether gcc accepts -g configure:5436: gcc -c -g conftest.c >&5 configure:5436: $? = 0 configure:5477: result: yes configure:5494: checking for gcc option to accept ISO C89 configure:5557: gcc -c -g -O2 conftest.c >&5 configure:5557: $? = 0 configure:5570: result: none needed configure:5593: checking for gcc configure:5611: found /Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/gcc/bin/gcc configure:5623: result: /Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/gcc/bin/gcc configure:5692: checking for g++ configure:5708: found /Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/gcc/bin/g++ configure:5719: result: g++ configure:5746: checking for C++ compiler version configure:5755: g++ --version >&5 g++ (GCC) 9.5.0 Copyright (C) 2019 Free Software Foundation, Inc. This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. configure:5766: $? = 0 configure:5755: g++ -v >&5 Using built-in specs. COLLECT_GCC=g++ COLLECT_LTO_WRAPPER=/Volumes/SAS/sasbuild/local/macOS11/GNU_CC_CXX_9.5.0/gcc_9.5.0/bin/../libexec/gcc/x86_64-apple-darwin20.6.0/9.5.0/lto-wrapper Target: x86_64-apple-darwin20.6.0 Configured with: ../gcc-9.5.0/configure --prefix=/sasbuild/local/macOS11/GNU_CC_CXX_9.5.0/gcc_9.5.0 --with-local-prefix=/sasbuild/local/macOS11/GNU_CC_CXX_9.5.0/gcc_9.5.0 --enable-checking=release --enable-languages=c,c++,fortran --disable-multilib --with-native-system=header-dir=/usr/include --with-sysroot=/Library/Developer/CommandLineTools/SDKs/MacOSX11.sdk Thread model: posix gcc version 9.5.0 (GCC) configure:5766: $? = 0 configure:5755: g++ -V >&5 g++: error: unrecognized command line option '-V' g++: fatal error: no input files compilation terminated. configure:5766: $? = 1 configure:5755: g++ -qversion >&5 g++: error: unrecognized command line option '-qversion'; did you mean '--version'? g++: fatal error: no input files compilation terminated. configure:5766: $? = 1 configure:5770: checking whether we are using the GNU C++ compiler configure:5789: g++ -c -DGFORTRAN conftest.cpp >&5 configure:5789: $? = 0 configure:5798: result: yes configure:5807: checking whether g++ accepts -g configure:5827: g++ -c -g conftest.cpp >&5 configure:5827: $? = 0 configure:5868: result: yes configure:5894: checking for g++ configure:5912: found /Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/gcc/bin/g++ configure:5924: result: /Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/gcc/bin/g++ configure:5958: checking how to run the C++ preprocessor configure:5985: g++ -E conftest.cpp configure:5985: $? = 0 configure:5999: g++ -E conftest.cpp conftest.cpp:9:10: fatal error: ac_nonexistent.h: No such file or directory 9 | #include | ^~~~~~~~~~~~~~~~~~ compilation terminated. configure:5999: $? = 1 configure: failed program was: | /* confdefs.h */ | #define PACKAGE_NAME "The XMM-Newton Science Analysis System" | #define PACKAGE_TARNAME "sas" | #define PACKAGE_VERSION "21.0.0" | #define PACKAGE_STRING "The XMM-Newton Science Analysis System 21.0.0" | #define PACKAGE_BUGREPORT "xmmhelp@sciops.esa.int" | #define PACKAGE_URL "https://www.cosmos.esa.int/web/xmm-newton/sas-news" | /* end confdefs.h. */ | #include configure:6024: result: g++ -E configure:6044: g++ -E conftest.cpp configure:6044: $? = 0 configure:6058: g++ -E conftest.cpp conftest.cpp:9:10: fatal error: ac_nonexistent.h: No such file or directory 9 | #include | ^~~~~~~~~~~~~~~~~~ compilation terminated. configure:6058: $? = 1 configure: failed program was: | /* confdefs.h */ | #define PACKAGE_NAME "The XMM-Newton Science Analysis System" | #define PACKAGE_TARNAME "sas" | #define PACKAGE_VERSION "21.0.0" | #define PACKAGE_STRING "The XMM-Newton Science Analysis System 21.0.0" | #define PACKAGE_BUGREPORT "xmmhelp@sciops.esa.int" | #define PACKAGE_URL "https://www.cosmos.esa.int/web/xmm-newton/sas-news" | /* end confdefs.h. */ | #include configure:6091: checking how to run the C preprocessor configure:6122: gcc -E conftest.c configure:6122: $? = 0 configure:6136: gcc -E conftest.c conftest.c:9:10: fatal error: ac_nonexistent.h: No such file or directory 9 | #include | ^~~~~~~~~~~~~~~~~~ compilation terminated. configure:6136: $? = 1 configure: failed program was: | /* confdefs.h */ | #define PACKAGE_NAME "The XMM-Newton Science Analysis System" | #define PACKAGE_TARNAME "sas" | #define PACKAGE_VERSION "21.0.0" | #define PACKAGE_STRING "The XMM-Newton Science Analysis System 21.0.0" | #define PACKAGE_BUGREPORT "xmmhelp@sciops.esa.int" | #define PACKAGE_URL "https://www.cosmos.esa.int/web/xmm-newton/sas-news" | /* end confdefs.h. */ | #include configure:6161: result: gcc -E configure:6181: gcc -E conftest.c configure:6181: $? = 0 configure:6195: gcc -E conftest.c conftest.c:9:10: fatal error: ac_nonexistent.h: No such file or directory 9 | #include | ^~~~~~~~~~~~~~~~~~ compilation terminated. configure:6195: $? = 1 configure: failed program was: | /* confdefs.h */ | #define PACKAGE_NAME "The XMM-Newton Science Analysis System" | #define PACKAGE_TARNAME "sas" | #define PACKAGE_VERSION "21.0.0" | #define PACKAGE_STRING "The XMM-Newton Science Analysis System 21.0.0" | #define PACKAGE_BUGREPORT "xmmhelp@sciops.esa.int" | #define PACKAGE_URL "https://www.cosmos.esa.int/web/xmm-newton/sas-news" | /* end confdefs.h. */ | #include configure:6317: checking for tex configure:6333: found /Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/texlive/bin/universal-darwin/tex configure:6344: result: tex configure:6370: checking for latex configure:6386: found /Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/texlive/bin/universal-darwin/latex configure:6397: result: latex configure:6421: checking for dvips configure:6437: found /Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/texlive/bin/universal-darwin/dvips configure:6448: result: dvips configure:6475: checking for dvipdf configure:6491: found /Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/ghostscript/bin/dvipdf configure:6502: result: dvipdf configure:6526: checking for latex2html configure:6542: found /Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/latex2html/bin/latex2html configure:6553: result: latex2html configure:6577: checking for /Applications/Safari.app configure:6590: result: yes configure:6657: checking for flex configure:6673: found /usr/bin/flex configure:6684: result: flex configure:6722: flex conftest.l configure:6726: $? = 0 configure:6728: checking lex output file root configure:6742: result: lex.yy configure:6747: checking lex library configure:6761: gcc -o conftest -g -O2 conftest.c -L. >&5 Undefined symbols for architecture x86_64: "_yywrap", referenced from: _yylex in ccCs06d6.o _main in ccCs06d6.o ld: symbol(s) not found for architecture x86_64 collect2: error: ld returned 1 exit status configure:6761: $? = 1 configure: failed program was: | /* confdefs.h */ | #define PACKAGE_NAME "The XMM-Newton Science Analysis System" | #define PACKAGE_TARNAME "sas" | #define PACKAGE_VERSION "21.0.0" | #define PACKAGE_STRING "The XMM-Newton Science Analysis System 21.0.0" | #define PACKAGE_BUGREPORT "xmmhelp@sciops.esa.int" | #define PACKAGE_URL "https://www.cosmos.esa.int/web/xmm-newton/sas-news" | #define MACOSX 1 | /* end confdefs.h. */ | | #line 2 "lex.yy.c" | | #define YY_INT_ALIGNED short int | | /* A lexical scanner generated by flex */ | | #define FLEX_SCANNER | #define YY_FLEX_MAJOR_VERSION 2 | #define YY_FLEX_MINOR_VERSION 6 | #define YY_FLEX_SUBMINOR_VERSION 4 | #if YY_FLEX_SUBMINOR_VERSION > 0 | #define FLEX_BETA | #endif | | /* First, we deal with platform-specific or compiler-specific issues. */ | | /* begin standard C headers. */ | #include | #include | #include | #include | | /* end standard C headers. */ | | /* flex integer type definitions */ | | #ifndef FLEXINT_H | #define FLEXINT_H | | /* C99 systems have . Non-C99 systems may or may not. */ | | #if defined (__STDC_VERSION__) && __STDC_VERSION__ >= 199901L | | /* C99 says to define __STDC_LIMIT_MACROS before including stdint.h, | * if you want the limit (max/min) macros for int types. | */ | #ifndef __STDC_LIMIT_MACROS | #define __STDC_LIMIT_MACROS 1 | #endif | | #include | typedef int8_t flex_int8_t; | typedef uint8_t flex_uint8_t; | typedef int16_t flex_int16_t; | typedef uint16_t flex_uint16_t; | typedef int32_t flex_int32_t; | typedef uint32_t flex_uint32_t; | typedef uint64_t flex_uint64_t; | #else | typedef signed char flex_int8_t; | typedef short int flex_int16_t; | typedef int flex_int32_t; | typedef unsigned char flex_uint8_t; | typedef unsigned short int flex_uint16_t; | typedef unsigned int flex_uint32_t; | | /* Limits of integral types. */ | #ifndef INT8_MIN | #define INT8_MIN (-128) | #endif | #ifndef INT16_MIN | #define INT16_MIN (-32767-1) | #endif | #ifndef INT32_MIN | #define INT32_MIN (-2147483647-1) | #endif | #ifndef INT8_MAX | #define INT8_MAX (127) | #endif | #ifndef INT16_MAX | #define INT16_MAX (32767) | #endif | #ifndef INT32_MAX | #define INT32_MAX (2147483647) | #endif | #ifndef UINT8_MAX | #define UINT8_MAX (255U) | #endif | #ifndef UINT16_MAX | #define UINT16_MAX (65535U) | #endif | #ifndef UINT32_MAX | #define UINT32_MAX (4294967295U) | #endif | | #ifndef SIZE_MAX | #define SIZE_MAX (~(size_t)0) | #endif | | #endif /* ! C99 */ | | #endif /* ! FLEXINT_H */ | | /* begin standard C++ headers. */ | | /* TODO: this is always defined, so inline it */ | #define yyconst const | | #if defined(__GNUC__) && __GNUC__ >= 3 | #define yynoreturn __attribute__((__noreturn__)) | #else | #define yynoreturn | #endif | | /* Returned upon end-of-file. */ | #define YY_NULL 0 | | /* Promotes a possibly negative, possibly signed char to an | * integer in range [0..255] for use as an array index. | */ | #define YY_SC_TO_UI(c) ((YY_CHAR) (c)) | | /* Enter a start condition. This macro really ought to take a parameter, | * but we do it the disgusting crufty way forced on us by the ()-less | * definition of BEGIN. | */ | #define BEGIN (yy_start) = 1 + 2 * | /* Translate the current start state into a value that can be later handed | * to BEGIN to return to the state. The YYSTATE alias is for lex | * compatibility. | */ | #define YY_START (((yy_start) - 1) / 2) | #define YYSTATE YY_START | /* Action number for EOF rule of a given start state. */ | #define YY_STATE_EOF(state) (YY_END_OF_BUFFER + state + 1) | /* Special action meaning "start processing a new file". */ | #define YY_NEW_FILE yyrestart( yyin ) | #define YY_END_OF_BUFFER_CHAR 0 | | /* Size of default input buffer. */ | #ifndef YY_BUF_SIZE | #ifdef __ia64__ | /* On IA-64, the buffer size is 16k, not 8k. | * Moreover, YY_BUF_SIZE is 2*YY_READ_BUF_SIZE in the general case. | * Ditto for the __ia64__ case accordingly. | */ | #define YY_BUF_SIZE 32768 | #else | #define YY_BUF_SIZE 16384 | #endif /* __ia64__ */ | #endif | | /* The state buf must be large enough to hold one state per character in the main buffer. | */ | #define YY_STATE_BUF_SIZE ((YY_BUF_SIZE + 2) * sizeof(yy_state_type)) | | #ifndef YY_TYPEDEF_YY_BUFFER_STATE | #define YY_TYPEDEF_YY_BUFFER_STATE | typedef struct yy_buffer_state *YY_BUFFER_STATE; | #endif | | #ifndef YY_TYPEDEF_YY_SIZE_T | #define YY_TYPEDEF_YY_SIZE_T | typedef size_t yy_size_t; | #endif | | extern yy_size_t yyleng; | | extern FILE *yyin, *yyout; | | #define EOB_ACT_CONTINUE_SCAN 0 | #define EOB_ACT_END_OF_FILE 1 | #define EOB_ACT_LAST_MATCH 2 | | #define YY_LESS_LINENO(n) | #define YY_LINENO_REWIND_TO(ptr) | | /* Return all but the first "n" matched characters back to the input stream. */ | #define yyless(n) \ | do \ | { \ | /* Undo effects of setting up yytext. */ \ | int yyless_macro_arg = (n); \ | YY_LESS_LINENO(yyless_macro_arg);\ | *yy_cp = (yy_hold_char); \ | YY_RESTORE_YY_MORE_OFFSET \ | (yy_c_buf_p) = yy_cp = yy_bp + yyless_macro_arg - YY_MORE_ADJ; \ | YY_DO_BEFORE_ACTION; /* set up yytext again */ \ | } \ | while ( 0 ) | #define unput(c) yyunput( c, (yytext_ptr) ) | | #ifndef YY_STRUCT_YY_BUFFER_STATE | #define YY_STRUCT_YY_BUFFER_STATE | struct yy_buffer_state | { | FILE *yy_input_file; | | char *yy_ch_buf; /* input buffer */ | char *yy_buf_pos; /* current position in input buffer */ | | /* Size of input buffer in bytes, not including room for EOB | * characters. | */ | int yy_buf_size; | | /* Number of characters read into yy_ch_buf, not including EOB | * characters. | */ | yy_size_t yy_n_chars; | | /* Whether we "own" the buffer - i.e., we know we created it, | * and can realloc() it to grow it, and should free() it to | * delete it. | */ | int yy_is_our_buffer; | | /* Whether this is an "interactive" input source; if so, and | * if we're using stdio for input, then we want to use getc() | * instead of fread(), to make sure we stop fetching input after | * each newline. | */ | int yy_is_interactive; | | /* Whether we're considered to be at the beginning of a line. | * If so, '^' rules will be active on the next match, otherwise | * not. | */ | int yy_at_bol; | | int yy_bs_lineno; /**< The line count. */ | int yy_bs_column; /**< The column count. */ | | /* Whether to try to fill the input buffer when we reach the | * end of it. | */ | int yy_fill_buffer; | | int yy_buffer_status; | | #define YY_BUFFER_NEW 0 | #define YY_BUFFER_NORMAL 1 | /* When an EOF's been seen but there's still some text to process | * then we mark the buffer as YY_EOF_PENDING, to indicate that we | * shouldn't try reading from the input source any more. We might | * still have a bunch of tokens to match, though, because of | * possible backing-up. | * | * When we actually see the EOF, we change the status to "new" | * (via yyrestart()), so that the user can continue scanning by | * just pointing yyin at a new input file. | */ | #define YY_BUFFER_EOF_PENDING 2 | | }; | #endif /* !YY_STRUCT_YY_BUFFER_STATE */ | | /* Stack of input buffers. */ | static size_t yy_buffer_stack_top = 0; /**< index of top of stack. */ | static size_t yy_buffer_stack_max = 0; /**< capacity of stack. */ | static YY_BUFFER_STATE * yy_buffer_stack = NULL; /**< Stack as an array. */ | | /* We provide macros for accessing buffer states in case in the | * future we want to put the buffer states in a more general | * "scanner state". | * | * Returns the top of the stack, or NULL. | */ | #define YY_CURRENT_BUFFER ( (yy_buffer_stack) \ | ? (yy_buffer_stack)[(yy_buffer_stack_top)] \ | : NULL) | /* Same as previous macro, but useful when we know that the buffer stack is not | * NULL or when we need an lvalue. For internal use only. | */ | #define YY_CURRENT_BUFFER_LVALUE (yy_buffer_stack)[(yy_buffer_stack_top)] | | /* yy_hold_char holds the character lost when yytext is formed. */ | static char yy_hold_char; | static yy_size_t yy_n_chars; /* number of characters read into yy_ch_buf */ | yy_size_t yyleng; | | /* Points to current character in buffer. */ | static char *yy_c_buf_p = NULL; | static int yy_init = 0; /* whether we need to initialize */ | static int yy_start = 0; /* start state number */ | | /* Flag which is used to allow yywrap()'s to do buffer switches | * instead of setting up a fresh yyin. A bit of a hack ... | */ | static int yy_did_buffer_switch_on_eof; | | void yyrestart ( FILE *input_file ); | void yy_switch_to_buffer ( YY_BUFFER_STATE new_buffer ); | YY_BUFFER_STATE yy_create_buffer ( FILE *file, int size ); | void yy_delete_buffer ( YY_BUFFER_STATE b ); | void yy_flush_buffer ( YY_BUFFER_STATE b ); | void yypush_buffer_state ( YY_BUFFER_STATE new_buffer ); | void yypop_buffer_state ( void ); | | static void yyensure_buffer_stack ( void ); | static void yy_load_buffer_state ( void ); | static void yy_init_buffer ( YY_BUFFER_STATE b, FILE *file ); | #define YY_FLUSH_BUFFER yy_flush_buffer( YY_CURRENT_BUFFER ) | | YY_BUFFER_STATE yy_scan_buffer ( char *base, yy_size_t size ); | YY_BUFFER_STATE yy_scan_string ( const char *yy_str ); | YY_BUFFER_STATE yy_scan_bytes ( const char *bytes, yy_size_t len ); | | void *yyalloc ( yy_size_t ); | void *yyrealloc ( void *, yy_size_t ); | void yyfree ( void * ); | | #define yy_new_buffer yy_create_buffer | #define yy_set_interactive(is_interactive) \ | { \ | if ( ! YY_CURRENT_BUFFER ){ \ | yyensure_buffer_stack (); \ | YY_CURRENT_BUFFER_LVALUE = \ | yy_create_buffer( yyin, YY_BUF_SIZE ); \ | } \ | YY_CURRENT_BUFFER_LVALUE->yy_is_interactive = is_interactive; \ | } | #define yy_set_bol(at_bol) \ | { \ | if ( ! YY_CURRENT_BUFFER ){\ | yyensure_buffer_stack (); \ | YY_CURRENT_BUFFER_LVALUE = \ | yy_create_buffer( yyin, YY_BUF_SIZE ); \ | } \ | YY_CURRENT_BUFFER_LVALUE->yy_at_bol = at_bol; \ | } | #define YY_AT_BOL() (YY_CURRENT_BUFFER_LVALUE->yy_at_bol) | | /* Begin user sect3 */ | typedef flex_uint8_t YY_CHAR; | | FILE *yyin = NULL, *yyout = NULL; | | typedef int yy_state_type; | | extern int yylineno; | int yylineno = 1; | | extern char *yytext; | #ifdef yytext_ptr | #undef yytext_ptr | #endif | #define yytext_ptr yytext | | static yy_state_type yy_get_previous_state ( void ); | static yy_state_type yy_try_NUL_trans ( yy_state_type current_state ); | static int yy_get_next_buffer ( void ); | static void yynoreturn yy_fatal_error ( const char* msg ); | | /* Done after the current pattern has been matched and before the | * corresponding action - sets up yytext. | */ | #define YY_DO_BEFORE_ACTION \ | (yytext_ptr) = yy_bp; \ | (yytext_ptr) -= (yy_more_len); \ | yyleng = (yy_size_t) (yy_cp - (yytext_ptr)); \ | (yy_hold_char) = *yy_cp; \ | *yy_cp = '\0'; \ | (yy_c_buf_p) = yy_cp; | #define YY_NUM_RULES 8 | #define YY_END_OF_BUFFER 9 | /* This struct is not used in this scanner, | but its presence is necessary. */ | struct yy_trans_info | { | flex_int32_t yy_verify; | flex_int32_t yy_nxt; | }; | static const flex_int16_t yy_acclist[23] = | { 0, | 9, 7, 8, 8, 1, 7, 8, 2, 7, 8, | 3, 7, 8, 4, 7, 8, 5, 7, 8, 6, | 7, 8 | } ; | | static const flex_int16_t yy_accept[14] = | { 0, | 1, 1, 1, 2, 4, 5, 8, 11, 14, 17, | 20, 23, 23 | } ; | | static const YY_CHAR yy_ec[256] = | { 0, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 2, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 3, 4, 5, 6, | | 7, 8, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1 | } ; | | static const YY_CHAR yy_meta[9] = | { 0, | 1, 1, 1, 1, 1, 1, 1, 1 | } ; | | static const flex_int16_t yy_base[13] = | { 0, | 0, 0, 9, 10, 10, 10, 10, 10, 10, 10, | 10, 10 | } ; | | static const flex_int16_t yy_def[13] = | { 0, | 12, 1, 12, 12, 12, 12, 12, 12, 12, 12, | 12, 0 | } ; | | static const flex_int16_t yy_nxt[19] = | { 0, | 4, 5, 6, 7, 8, 9, 10, 11, 12, 3, | 12, 12, 12, 12, 12, 12, 12, 12 | } ; | | static const flex_int16_t yy_chk[19] = | { 0, | 1, 1, 1, 1, 1, 1, 1, 1, 3, 12, | 12, 12, 12, 12, 12, 12, 12, 12 | } ; | | extern int yy_flex_debug; | int yy_flex_debug = 0; | | static yy_state_type *yy_state_buf=0, *yy_state_ptr=0; | static char *yy_full_match; | static int yy_lp; | #define REJECT \ | { \ | *yy_cp = (yy_hold_char); /* undo effects of setting up yytext */ \ | yy_cp = (yy_full_match); /* restore poss. backed-over text */ \ | ++(yy_lp); \ | goto find_rule; \ | } | | static int yy_more_flag = 0; | static int yy_more_len = 0; | #define yymore() ((yy_more_flag) = 1) | #define YY_MORE_ADJ (yy_more_len) | #define YY_RESTORE_YY_MORE_OFFSET | char *yytext; | #line 1 "conftest.l" | #line 460 "lex.yy.c" | | #define INITIAL 0 | | #ifndef YY_NO_UNISTD_H | /* Special case for "unistd.h", since it is non-ANSI. We include it way | * down here because we want the user's section 1 to have been scanned first. | * The user has a chance to override it with an option. | */ | #include | #endif | | #ifndef YY_EXTRA_TYPE | #define YY_EXTRA_TYPE void * | #endif | | static int yy_init_globals ( void ); | | /* Accessor methods to globals. | These are made visible to non-reentrant scanners for convenience. */ | | int yylex_destroy ( void ); | | int yyget_debug ( void ); | | void yyset_debug ( int debug_flag ); | | YY_EXTRA_TYPE yyget_extra ( void ); | | void yyset_extra ( YY_EXTRA_TYPE user_defined ); | | FILE *yyget_in ( void ); | | void yyset_in ( FILE * _in_str ); | | FILE *yyget_out ( void ); | | void yyset_out ( FILE * _out_str ); | | yy_size_t yyget_leng ( void ); | | char *yyget_text ( void ); | | int yyget_lineno ( void ); | | void yyset_lineno ( int _line_number ); | | /* Macros after this point can all be overridden by user definitions in | * section 1. | */ | | #ifndef YY_SKIP_YYWRAP | #ifdef __cplusplus | extern "C" int yywrap ( void ); | #else | extern int yywrap ( void ); | #endif | #endif | | #ifndef YY_NO_UNPUT | | static void yyunput ( int c, char *buf_ptr ); | | #endif | | #ifndef yytext_ptr | static void yy_flex_strncpy ( char *, const char *, int ); | #endif | | #ifdef YY_NEED_STRLEN | static int yy_flex_strlen ( const char * ); | #endif | | #ifndef YY_NO_INPUT | #ifdef __cplusplus | static int yyinput ( void ); | #else | static int input ( void ); | #endif | | #endif | | /* Amount of stuff to slurp up with each read. */ | #ifndef YY_READ_BUF_SIZE | #ifdef __ia64__ | /* On IA-64, the buffer size is 16k, not 8k */ | #define YY_READ_BUF_SIZE 16384 | #else | #define YY_READ_BUF_SIZE 8192 | #endif /* __ia64__ */ | #endif | | /* Copy whatever the last rule matched to the standard output. */ | #ifndef ECHO | /* This used to be an fputs(), but since the string might contain NUL's, | * we now use fwrite(). | */ | #define ECHO do { if (fwrite( yytext, (size_t) yyleng, 1, yyout )) {} } while (0) | #endif | | /* Gets input and stuffs it into "buf". number of characters read, or YY_NULL, | * is returned in "result". | */ | #ifndef YY_INPUT | #define YY_INPUT(buf,result,max_size) \ | if ( YY_CURRENT_BUFFER_LVALUE->yy_is_interactive ) \ | { \ | int c = '*'; \ | yy_size_t n; \ | for ( n = 0; n < max_size && \ | (c = getc( yyin )) != EOF && c != '\n'; ++n ) \ | buf[n] = (char) c; \ | if ( c == '\n' ) \ | buf[n++] = (char) c; \ | if ( c == EOF && ferror( yyin ) ) \ | YY_FATAL_ERROR( "input in flex scanner failed" ); \ | result = n; \ | } \ | else \ | { \ | errno=0; \ | while ( (result = (int) fread(buf, 1, (yy_size_t) max_size, yyin)) == 0 && ferror(yyin)) \ | { \ | if( errno != EINTR) \ | { \ | YY_FATAL_ERROR( "input in flex scanner failed" ); \ | break; \ | } \ | errno=0; \ | clearerr(yyin); \ | } \ | }\ | \ | | #endif | | /* No semi-colon after return; correct usage is to write "yyterminate();" - | * we don't want an extra ';' after the "return" because that will cause | * some compilers to complain about unreachable statements. | */ | #ifndef yyterminate | #define yyterminate() return YY_NULL | #endif | | /* Number of entries by which start-condition stack grows. */ | #ifndef YY_START_STACK_INCR | #define YY_START_STACK_INCR 25 | #endif | | /* Report a fatal error. */ | #ifndef YY_FATAL_ERROR | #define YY_FATAL_ERROR(msg) yy_fatal_error( msg ) | #endif | | /* end tables serialization structures and prototypes */ | | /* Default declaration of generated scanner - a define so the user can | * easily add parameters. | */ | #ifndef YY_DECL | #define YY_DECL_IS_OURS 1 | | extern int yylex (void); | | #define YY_DECL int yylex (void) | #endif /* !YY_DECL */ | | /* Code executed at the beginning of each rule, after yytext and yyleng | * have been set up. | */ | #ifndef YY_USER_ACTION | #define YY_USER_ACTION | #endif | | /* Code executed at the end of each rule. */ | #ifndef YY_BREAK | #define YY_BREAK /*LINTED*/break; | #endif | | #define YY_RULE_SETUP \ | YY_USER_ACTION | | /** The main scanner function which does all the work. | */ | YY_DECL | { | yy_state_type yy_current_state; | char *yy_cp, *yy_bp; | int yy_act; | | if ( !(yy_init) ) | { | (yy_init) = 1; | | #ifdef YY_USER_INIT | YY_USER_INIT; | #endif | | /* Create the reject buffer large enough to save one state per allowed character. */ | if ( ! (yy_state_buf) ) | (yy_state_buf) = (yy_state_type *)yyalloc(YY_STATE_BUF_SIZE ); | if ( ! (yy_state_buf) ) | YY_FATAL_ERROR( "out of dynamic memory in yylex()" ); | | if ( ! (yy_start) ) | (yy_start) = 1; /* first start state */ | | if ( ! yyin ) | yyin = stdin; | | if ( ! yyout ) | yyout = stdout; | | if ( ! YY_CURRENT_BUFFER ) { | yyensure_buffer_stack (); | YY_CURRENT_BUFFER_LVALUE = | yy_create_buffer( yyin, YY_BUF_SIZE ); | } | | yy_load_buffer_state( ); | } | | { | #line 1 "conftest.l" | | #line 685 "lex.yy.c" | | while ( /*CONSTCOND*/1 ) /* loops until end-of-file is reached */ | { | (yy_more_len) = 0; | if ( (yy_more_flag) ) | { | (yy_more_len) = (int) ((yy_c_buf_p) - (yytext_ptr)); | (yy_more_flag) = 0; | } | yy_cp = (yy_c_buf_p); | | /* Support of yytext. */ | *yy_cp = (yy_hold_char); | | /* yy_bp points to the position in yy_ch_buf of the start of | * the current run. | */ | yy_bp = yy_cp; | | yy_current_state = (yy_start); | | (yy_state_ptr) = (yy_state_buf); | *(yy_state_ptr)++ = yy_current_state; | | yy_match: | do | { | YY_CHAR yy_c = yy_ec[YY_SC_TO_UI(*yy_cp)] ; | while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state ) | { | yy_current_state = (int) yy_def[yy_current_state]; | if ( yy_current_state >= 13 ) | yy_c = yy_meta[yy_c]; | } | yy_current_state = yy_nxt[yy_base[yy_current_state] + yy_c]; | *(yy_state_ptr)++ = yy_current_state; | ++yy_cp; | } | while ( yy_base[yy_current_state] != 10 ); | | yy_find_action: | yy_current_state = *--(yy_state_ptr); | (yy_lp) = yy_accept[yy_current_state]; | | goto find_rule; /* Shut up GCC warning -Wall */ | find_rule: /* we branch to this label when backing up */ | | for ( ; ; ) /* until we find what rule we matched */ | { | if ( (yy_lp) && (yy_lp) < yy_accept[yy_current_state + 1] ) | { | yy_act = yy_acclist[(yy_lp)]; | { | (yy_full_match) = yy_cp; | break; | } | } | --yy_cp; | yy_current_state = *--(yy_state_ptr); | (yy_lp) = yy_accept[yy_current_state]; | } | | YY_DO_BEFORE_ACTION; | | do_action: /* This label is used only to access EOF actions. */ | | switch ( yy_act ) | { /* beginning of action switch */ | case 1: | YY_RULE_SETUP | #line 2 "conftest.l" | { ECHO; } | YY_BREAK | case 2: | YY_RULE_SETUP | #line 3 "conftest.l" | { REJECT; } | YY_BREAK | case 3: | YY_RULE_SETUP | #line 4 "conftest.l" | { yymore (); } | YY_BREAK | case 4: | YY_RULE_SETUP | #line 5 "conftest.l" | { yyless (1); } | YY_BREAK | case 5: | YY_RULE_SETUP | #line 6 "conftest.l" | { /* IRIX 6.5 flex 2.5.4 underquotes its yyless argument. */ | yyless ((input () != 0)); } | YY_BREAK | case 6: | YY_RULE_SETUP | #line 8 "conftest.l" | { unput (yytext[0]); } | YY_BREAK | case 7: | YY_RULE_SETUP | #line 9 "conftest.l" | { BEGIN INITIAL; } | YY_BREAK | case 8: | YY_RULE_SETUP | #line 10 "conftest.l" | ECHO; | YY_BREAK | #line 795 "lex.yy.c" | case YY_STATE_EOF(INITIAL): | yyterminate(); | | case YY_END_OF_BUFFER: | { | /* Amount of text matched not including the EOB char. */ | int yy_amount_of_matched_text = (int) (yy_cp - (yytext_ptr)) - 1; | | /* Undo the effects of YY_DO_BEFORE_ACTION. */ | *yy_cp = (yy_hold_char); | YY_RESTORE_YY_MORE_OFFSET | | if ( YY_CURRENT_BUFFER_LVALUE->yy_buffer_status == YY_BUFFER_NEW ) | { | /* We're scanning a new file or input source. It's | * possible that this happened because the user | * just pointed yyin at a new source and called | * yylex(). If so, then we have to assure | * consistency between YY_CURRENT_BUFFER and our | * globals. Here is the right place to do so, because | * this is the first action (other than possibly a | * back-up) that will match for the new input source. | */ | (yy_n_chars) = YY_CURRENT_BUFFER_LVALUE->yy_n_chars; | YY_CURRENT_BUFFER_LVALUE->yy_input_file = yyin; | YY_CURRENT_BUFFER_LVALUE->yy_buffer_status = YY_BUFFER_NORMAL; | } | | /* Note that here we test for yy_c_buf_p "<=" to the position | * of the first EOB in the buffer, since yy_c_buf_p will | * already have been incremented past the NUL character | * (since all states make transitions on EOB to the | * end-of-buffer state). Contrast this with the test | * in input(). | */ | if ( (yy_c_buf_p) <= &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)] ) | { /* This was really a NUL. */ | yy_state_type yy_next_state; | | (yy_c_buf_p) = (yytext_ptr) + yy_amount_of_matched_text; | | yy_current_state = yy_get_previous_state( ); | | /* Okay, we're now positioned to make the NUL | * transition. We couldn't have | * yy_get_previous_state() go ahead and do it | * for us because it doesn't know how to deal | * with the possibility of jamming (and we don't | * want to build jamming into it because then it | * will run more slowly). | */ | | yy_next_state = yy_try_NUL_trans( yy_current_state ); | | yy_bp = (yytext_ptr) + YY_MORE_ADJ; | | if ( yy_next_state ) | { | /* Consume the NUL. */ | yy_cp = ++(yy_c_buf_p); | yy_current_state = yy_next_state; | goto yy_match; | } | | else | { | yy_cp = (yy_c_buf_p); | goto yy_find_action; | } | } | | else switch ( yy_get_next_buffer( ) ) | { | case EOB_ACT_END_OF_FILE: | { | (yy_did_buffer_switch_on_eof) = 0; | | if ( yywrap( ) ) | { | /* Note: because we've taken care in | * yy_get_next_buffer() to have set up | * yytext, we can now set up | * yy_c_buf_p so that if some total | * hoser (like flex itself) wants to | * call the scanner after we return the | * YY_NULL, it'll still work - another | * YY_NULL will get returned. | */ | (yy_c_buf_p) = (yytext_ptr) + YY_MORE_ADJ; | | yy_act = YY_STATE_EOF(YY_START); | goto do_action; | } | | else | { | if ( ! (yy_did_buffer_switch_on_eof) ) | YY_NEW_FILE; | } | break; | } | | case EOB_ACT_CONTINUE_SCAN: | (yy_c_buf_p) = | (yytext_ptr) + yy_amount_of_matched_text; | | yy_current_state = yy_get_previous_state( ); | | yy_cp = (yy_c_buf_p); | yy_bp = (yytext_ptr) + YY_MORE_ADJ; | goto yy_match; | | case EOB_ACT_LAST_MATCH: | (yy_c_buf_p) = | &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)]; | | yy_current_state = yy_get_previous_state( ); | | yy_cp = (yy_c_buf_p); | yy_bp = (yytext_ptr) + YY_MORE_ADJ; | goto yy_find_action; | } | break; | } | | default: | YY_FATAL_ERROR( | "fatal flex scanner internal error--no action found" ); | } /* end of action switch */ | } /* end of scanning one token */ | } /* end of user's declarations */ | } /* end of yylex */ | | /* yy_get_next_buffer - try to read in a new buffer | * | * Returns a code representing an action: | * EOB_ACT_LAST_MATCH - | * EOB_ACT_CONTINUE_SCAN - continue scanning from current position | * EOB_ACT_END_OF_FILE - end of file | */ | static int yy_get_next_buffer (void) | { | char *dest = YY_CURRENT_BUFFER_LVALUE->yy_ch_buf; | char *source = (yytext_ptr); | int number_to_move, i; | int ret_val; | | if ( (yy_c_buf_p) > &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars) + 1] ) | YY_FATAL_ERROR( | "fatal flex scanner internal error--end of buffer missed" ); | | if ( YY_CURRENT_BUFFER_LVALUE->yy_fill_buffer == 0 ) | { /* Don't try to fill the buffer, so this is an EOF. */ | if ( (yy_c_buf_p) - (yytext_ptr) - YY_MORE_ADJ == 1 ) | { | /* We matched a single character, the EOB, so | * treat this as a final EOF. | */ | return EOB_ACT_END_OF_FILE; | } | | else | { | /* We matched some text prior to the EOB, first | * process it. | */ | return EOB_ACT_LAST_MATCH; | } | } | | /* Try to read more data. */ | | /* First move last chars to start of buffer. */ | number_to_move = (int) ((yy_c_buf_p) - (yytext_ptr) - 1); | | for ( i = 0; i < number_to_move; ++i ) | *(dest++) = *(source++); | | if ( YY_CURRENT_BUFFER_LVALUE->yy_buffer_status == YY_BUFFER_EOF_PENDING ) | /* don't do the read, it's not guaranteed to return an EOF, | * just force an EOF | */ | YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars) = 0; | | else | { | yy_size_t num_to_read = | YY_CURRENT_BUFFER_LVALUE->yy_buf_size - number_to_move - 1; | | while ( num_to_read <= 0 ) | { /* Not enough room in the buffer - grow it. */ | | YY_FATAL_ERROR( | "input buffer overflow, can't enlarge buffer because scanner uses REJECT" ); | | } | | if ( num_to_read > YY_READ_BUF_SIZE ) | num_to_read = YY_READ_BUF_SIZE; | | /* Read in more data. */ | YY_INPUT( (&YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[number_to_move]), | (yy_n_chars), num_to_read ); | | YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars); | } | | if ( (yy_n_chars) == 0 ) | { | if ( number_to_move == YY_MORE_ADJ ) | { | ret_val = EOB_ACT_END_OF_FILE; | yyrestart( yyin ); | } | | else | { | ret_val = EOB_ACT_LAST_MATCH; | YY_CURRENT_BUFFER_LVALUE->yy_buffer_status = | YY_BUFFER_EOF_PENDING; | } | } | | else | ret_val = EOB_ACT_CONTINUE_SCAN; | | if (((yy_n_chars) + number_to_move) > YY_CURRENT_BUFFER_LVALUE->yy_buf_size) { | /* Extend the array by 50%, plus the number we really need. */ | yy_size_t new_size = (yy_n_chars) + number_to_move + ((yy_n_chars) >> 1); | YY_CURRENT_BUFFER_LVALUE->yy_ch_buf = (char *) yyrealloc( | (void *) YY_CURRENT_BUFFER_LVALUE->yy_ch_buf, (yy_size_t) new_size ); | if ( ! YY_CURRENT_BUFFER_LVALUE->yy_ch_buf ) | YY_FATAL_ERROR( "out of dynamic memory in yy_get_next_buffer()" ); | /* "- 2" to take care of EOB's */ | YY_CURRENT_BUFFER_LVALUE->yy_buf_size = (int) (new_size - 2); | } | | (yy_n_chars) += number_to_move; | YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)] = YY_END_OF_BUFFER_CHAR; | YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars) + 1] = YY_END_OF_BUFFER_CHAR; | | (yytext_ptr) = &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[0]; | | return ret_val; | } | | /* yy_get_previous_state - get the state just before the EOB char was reached */ | | static yy_state_type yy_get_previous_state (void) | { | yy_state_type yy_current_state; | char *yy_cp; | | yy_current_state = (yy_start); | | (yy_state_ptr) = (yy_state_buf); | *(yy_state_ptr)++ = yy_current_state; | | for ( yy_cp = (yytext_ptr) + YY_MORE_ADJ; yy_cp < (yy_c_buf_p); ++yy_cp ) | { | YY_CHAR yy_c = (*yy_cp ? yy_ec[YY_SC_TO_UI(*yy_cp)] : 1); | while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state ) | { | yy_current_state = (int) yy_def[yy_current_state]; | if ( yy_current_state >= 13 ) | yy_c = yy_meta[yy_c]; | } | yy_current_state = yy_nxt[yy_base[yy_current_state] + yy_c]; | *(yy_state_ptr)++ = yy_current_state; | } | | return yy_current_state; | } | | /* yy_try_NUL_trans - try to make a transition on the NUL character | * | * synopsis | * next_state = yy_try_NUL_trans( current_state ); | */ | static yy_state_type yy_try_NUL_trans (yy_state_type yy_current_state ) | { | int yy_is_jam; | | YY_CHAR yy_c = 1; | while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state ) | { | yy_current_state = (int) yy_def[yy_current_state]; | if ( yy_current_state >= 13 ) | yy_c = yy_meta[yy_c]; | } | yy_current_state = yy_nxt[yy_base[yy_current_state] + yy_c]; | yy_is_jam = (yy_current_state == 12); | if ( ! yy_is_jam ) | *(yy_state_ptr)++ = yy_current_state; | | return yy_is_jam ? 0 : yy_current_state; | } | | #ifndef YY_NO_UNPUT | | static void yyunput (int c, char * yy_bp ) | { | char *yy_cp; | | yy_cp = (yy_c_buf_p); | | /* undo effects of setting up yytext */ | *yy_cp = (yy_hold_char); | | if ( yy_cp < YY_CURRENT_BUFFER_LVALUE->yy_ch_buf + 2 ) | { /* need to shift things up to make room */ | /* +2 for EOB chars. */ | yy_size_t number_to_move = (yy_n_chars) + 2; | char *dest = &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[ | YY_CURRENT_BUFFER_LVALUE->yy_buf_size + 2]; | char *source = | &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[number_to_move]; | | while ( source > YY_CURRENT_BUFFER_LVALUE->yy_ch_buf ) | *--dest = *--source; | | yy_cp += (int) (dest - source); | yy_bp += (int) (dest - source); | YY_CURRENT_BUFFER_LVALUE->yy_n_chars = | (yy_n_chars) = (int) YY_CURRENT_BUFFER_LVALUE->yy_buf_size; | | if ( yy_cp < YY_CURRENT_BUFFER_LVALUE->yy_ch_buf + 2 ) | YY_FATAL_ERROR( "flex scanner push-back overflow" ); | } | | *--yy_cp = (char) c; | | (yytext_ptr) = yy_bp; | (yy_hold_char) = *yy_cp; | (yy_c_buf_p) = yy_cp; | } | | #endif | | #ifndef YY_NO_INPUT | #ifdef __cplusplus | static int yyinput (void) | #else | static int input (void) | #endif | | { | int c; | | *(yy_c_buf_p) = (yy_hold_char); | | if ( *(yy_c_buf_p) == YY_END_OF_BUFFER_CHAR ) | { | /* yy_c_buf_p now points to the character we want to return. | * If this occurs *before* the EOB characters, then it's a | * valid NUL; if not, then we've hit the end of the buffer. | */ | if ( (yy_c_buf_p) < &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)] ) | /* This was really a NUL. */ | *(yy_c_buf_p) = '\0'; | | else | { /* need more input */ | yy_size_t offset = (yy_c_buf_p) - (yytext_ptr); | ++(yy_c_buf_p); | | switch ( yy_get_next_buffer( ) ) | { | case EOB_ACT_LAST_MATCH: | /* This happens because yy_g_n_b() | * sees that we've accumulated a | * token and flags that we need to | * try matching the token before | * proceeding. But for input(), | * there's no matching to consider. | * So convert the EOB_ACT_LAST_MATCH | * to EOB_ACT_END_OF_FILE. | */ | | /* Reset buffer status. */ | yyrestart( yyin ); | | /*FALLTHROUGH*/ | | case EOB_ACT_END_OF_FILE: | { | if ( yywrap( ) ) | return 0; | | if ( ! (yy_did_buffer_switch_on_eof) ) | YY_NEW_FILE; | #ifdef __cplusplus | return yyinput(); | #else | return input(); | #endif | } | | case EOB_ACT_CONTINUE_SCAN: | (yy_c_buf_p) = (yytext_ptr) + offset; | break; | } | } | } | | c = *(unsigned char *) (yy_c_buf_p); /* cast for 8-bit char's */ | *(yy_c_buf_p) = '\0'; /* preserve yytext */ | (yy_hold_char) = *++(yy_c_buf_p); | | return c; | } | #endif /* ifndef YY_NO_INPUT */ | | /** Immediately switch to a different input stream. | * @param input_file A readable stream. | * | * @note This function does not reset the start condition to @c INITIAL . | */ | void yyrestart (FILE * input_file ) | { | | if ( ! YY_CURRENT_BUFFER ){ | yyensure_buffer_stack (); | YY_CURRENT_BUFFER_LVALUE = | yy_create_buffer( yyin, YY_BUF_SIZE ); | } | | yy_init_buffer( YY_CURRENT_BUFFER, input_file ); | yy_load_buffer_state( ); | } | | /** Switch to a different input buffer. | * @param new_buffer The new input buffer. | * | */ | void yy_switch_to_buffer (YY_BUFFER_STATE new_buffer ) | { | | /* TODO. We should be able to replace this entire function body | * with | * yypop_buffer_state(); | * yypush_buffer_state(new_buffer); | */ | yyensure_buffer_stack (); | if ( YY_CURRENT_BUFFER == new_buffer ) | return; | | if ( YY_CURRENT_BUFFER ) | { | /* Flush out information for old buffer. */ | *(yy_c_buf_p) = (yy_hold_char); | YY_CURRENT_BUFFER_LVALUE->yy_buf_pos = (yy_c_buf_p); | YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars); | } | | YY_CURRENT_BUFFER_LVALUE = new_buffer; | yy_load_buffer_state( ); | | /* We don't actually know whether we did this switch during | * EOF (yywrap()) processing, but the only time this flag | * is looked at is after yywrap() is called, so it's safe | * to go ahead and always set it. | */ | (yy_did_buffer_switch_on_eof) = 1; | } | | static void yy_load_buffer_state (void) | { | (yy_n_chars) = YY_CURRENT_BUFFER_LVALUE->yy_n_chars; | (yytext_ptr) = (yy_c_buf_p) = YY_CURRENT_BUFFER_LVALUE->yy_buf_pos; | yyin = YY_CURRENT_BUFFER_LVALUE->yy_input_file; | (yy_hold_char) = *(yy_c_buf_p); | } | | /** Allocate and initialize an input buffer state. | * @param file A readable stream. | * @param size The character buffer size in bytes. When in doubt, use @c YY_BUF_SIZE. | * | * @return the allocated buffer state. | */ | YY_BUFFER_STATE yy_create_buffer (FILE * file, int size ) | { | YY_BUFFER_STATE b; | | b = (YY_BUFFER_STATE) yyalloc( sizeof( struct yy_buffer_state ) ); | if ( ! b ) | YY_FATAL_ERROR( "out of dynamic memory in yy_create_buffer()" ); | | b->yy_buf_size = size; | | /* yy_ch_buf has to be 2 characters longer than the size given because | * we need to put in 2 end-of-buffer characters. | */ | b->yy_ch_buf = (char *) yyalloc( (yy_size_t) (b->yy_buf_size + 2) ); | if ( ! b->yy_ch_buf ) | YY_FATAL_ERROR( "out of dynamic memory in yy_create_buffer()" ); | | b->yy_is_our_buffer = 1; | | yy_init_buffer( b, file ); | | return b; | } | | /** Destroy the buffer. | * @param b a buffer created with yy_create_buffer() | * | */ | void yy_delete_buffer (YY_BUFFER_STATE b ) | { | | if ( ! b ) | return; | | if ( b == YY_CURRENT_BUFFER ) /* Not sure if we should pop here. */ | YY_CURRENT_BUFFER_LVALUE = (YY_BUFFER_STATE) 0; | | if ( b->yy_is_our_buffer ) | yyfree( (void *) b->yy_ch_buf ); | | yyfree( (void *) b ); | } | | /* Initializes or reinitializes a buffer. | * This function is sometimes called more than once on the same buffer, | * such as during a yyrestart() or at EOF. | */ | static void yy_init_buffer (YY_BUFFER_STATE b, FILE * file ) | | { | int oerrno = errno; | | yy_flush_buffer( b ); | | b->yy_input_file = file; | b->yy_fill_buffer = 1; | | /* If b is the current buffer, then yy_init_buffer was _probably_ | * called from yyrestart() or through yy_get_next_buffer. | * In that case, we don't want to reset the lineno or column. | */ | if (b != YY_CURRENT_BUFFER){ | b->yy_bs_lineno = 1; | b->yy_bs_column = 0; | } | | b->yy_is_interactive = file ? (isatty( fileno(file) ) > 0) : 0; | | errno = oerrno; | } | | /** Discard all buffered characters. On the next scan, YY_INPUT will be called. | * @param b the buffer state to be flushed, usually @c YY_CURRENT_BUFFER. | * | */ | void yy_flush_buffer (YY_BUFFER_STATE b ) | { | if ( ! b ) | return; | | b->yy_n_chars = 0; | | /* We always need two end-of-buffer characters. The first causes | * a transition to the end-of-buffer state. The second causes | * a jam in that state. | */ | b->yy_ch_buf[0] = YY_END_OF_BUFFER_CHAR; | b->yy_ch_buf[1] = YY_END_OF_BUFFER_CHAR; | | b->yy_buf_pos = &b->yy_ch_buf[0]; | | b->yy_at_bol = 1; | b->yy_buffer_status = YY_BUFFER_NEW; | | if ( b == YY_CURRENT_BUFFER ) | yy_load_buffer_state( ); | } | | /** Pushes the new state onto the stack. The new state becomes | * the current state. This function will allocate the stack | * if necessary. | * @param new_buffer The new state. | * | */ | void yypush_buffer_state (YY_BUFFER_STATE new_buffer ) | { | if (new_buffer == NULL) | return; | | yyensure_buffer_stack(); | | /* This block is copied from yy_switch_to_buffer. */ | if ( YY_CURRENT_BUFFER ) | { | /* Flush out information for old buffer. */ | *(yy_c_buf_p) = (yy_hold_char); | YY_CURRENT_BUFFER_LVALUE->yy_buf_pos = (yy_c_buf_p); | YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars); | } | | /* Only push if top exists. Otherwise, replace top. */ | if (YY_CURRENT_BUFFER) | (yy_buffer_stack_top)++; | YY_CURRENT_BUFFER_LVALUE = new_buffer; | | /* copied from yy_switch_to_buffer. */ | yy_load_buffer_state( ); | (yy_did_buffer_switch_on_eof) = 1; | } | | /** Removes and deletes the top of the stack, if present. | * The next element becomes the new top. | * | */ | void yypop_buffer_state (void) | { | if (!YY_CURRENT_BUFFER) | return; | | yy_delete_buffer(YY_CURRENT_BUFFER ); | YY_CURRENT_BUFFER_LVALUE = NULL; | if ((yy_buffer_stack_top) > 0) | --(yy_buffer_stack_top); | | if (YY_CURRENT_BUFFER) { | yy_load_buffer_state( ); | (yy_did_buffer_switch_on_eof) = 1; | } | } | | /* Allocates the stack if it does not exist. | * Guarantees space for at least one push. | */ | static void yyensure_buffer_stack (void) | { | yy_size_t num_to_alloc; | | if (!(yy_buffer_stack)) { | | /* First allocation is just for 2 elements, since we don't know if this | * scanner will even need a stack. We use 2 instead of 1 to avoid an | * immediate realloc on the next call. | */ | num_to_alloc = 1; /* After all that talk, this was set to 1 anyways... */ | (yy_buffer_stack) = (struct yy_buffer_state**)yyalloc | (num_to_alloc * sizeof(struct yy_buffer_state*) | ); | if ( ! (yy_buffer_stack) ) | YY_FATAL_ERROR( "out of dynamic memory in yyensure_buffer_stack()" ); | | memset((yy_buffer_stack), 0, num_to_alloc * sizeof(struct yy_buffer_state*)); | | (yy_buffer_stack_max) = num_to_alloc; | (yy_buffer_stack_top) = 0; | return; | } | | if ((yy_buffer_stack_top) >= ((yy_buffer_stack_max)) - 1){ | | /* Increase the buffer to prepare for a possible push. */ | yy_size_t grow_size = 8 /* arbitrary grow size */; | | num_to_alloc = (yy_buffer_stack_max) + grow_size; | (yy_buffer_stack) = (struct yy_buffer_state**)yyrealloc | ((yy_buffer_stack), | num_to_alloc * sizeof(struct yy_buffer_state*) | ); | if ( ! (yy_buffer_stack) ) | YY_FATAL_ERROR( "out of dynamic memory in yyensure_buffer_stack()" ); | | /* zero only the new slots.*/ | memset((yy_buffer_stack) + (yy_buffer_stack_max), 0, grow_size * sizeof(struct yy_buffer_state*)); | (yy_buffer_stack_max) = num_to_alloc; | } | } | | /** Setup the input buffer state to scan directly from a user-specified character buffer. | * @param base the character buffer | * @param size the size in bytes of the character buffer | * | * @return the newly allocated buffer state object. | */ | YY_BUFFER_STATE yy_scan_buffer (char * base, yy_size_t size ) | { | YY_BUFFER_STATE b; | | if ( size < 2 || | base[size-2] != YY_END_OF_BUFFER_CHAR || | base[size-1] != YY_END_OF_BUFFER_CHAR ) | /* They forgot to leave room for the EOB's. */ | return NULL; | | b = (YY_BUFFER_STATE) yyalloc( sizeof( struct yy_buffer_state ) ); | if ( ! b ) | YY_FATAL_ERROR( "out of dynamic memory in yy_scan_buffer()" ); | | b->yy_buf_size = (int) (size - 2); /* "- 2" to take care of EOB's */ | b->yy_buf_pos = b->yy_ch_buf = base; | b->yy_is_our_buffer = 0; | b->yy_input_file = NULL; | b->yy_n_chars = b->yy_buf_size; | b->yy_is_interactive = 0; | b->yy_at_bol = 1; | b->yy_fill_buffer = 0; | b->yy_buffer_status = YY_BUFFER_NEW; | | yy_switch_to_buffer( b ); | | return b; | } | | /** Setup the input buffer state to scan a string. The next call to yylex() will | * scan from a @e copy of @a str. | * @param yystr a NUL-terminated string to scan | * | * @return the newly allocated buffer state object. | * @note If you want to scan bytes that may contain NUL values, then use | * yy_scan_bytes() instead. | */ | YY_BUFFER_STATE yy_scan_string (const char * yystr ) | { | | return yy_scan_bytes( yystr, (int) strlen(yystr) ); | } | | /** Setup the input buffer state to scan the given bytes. The next call to yylex() will | * scan from a @e copy of @a bytes. | * @param yybytes the byte buffer to scan | * @param _yybytes_len the number of bytes in the buffer pointed to by @a bytes. | * | * @return the newly allocated buffer state object. | */ | YY_BUFFER_STATE yy_scan_bytes (const char * yybytes, yy_size_t _yybytes_len ) | { | YY_BUFFER_STATE b; | char *buf; | yy_size_t n; | yy_size_t i; | | /* Get memory for full buffer, including space for trailing EOB's. */ | n = (yy_size_t) (_yybytes_len + 2); | buf = (char *) yyalloc( n ); | if ( ! buf ) | YY_FATAL_ERROR( "out of dynamic memory in yy_scan_bytes()" ); | | for ( i = 0; i < _yybytes_len; ++i ) | buf[i] = yybytes[i]; | | buf[_yybytes_len] = buf[_yybytes_len+1] = YY_END_OF_BUFFER_CHAR; | | b = yy_scan_buffer( buf, n ); | if ( ! b ) | YY_FATAL_ERROR( "bad buffer in yy_scan_bytes()" ); | | /* It's okay to grow etc. this buffer, and we should throw it | * away when we're done. | */ | b->yy_is_our_buffer = 1; | | return b; | } | | #ifndef YY_EXIT_FAILURE | #define YY_EXIT_FAILURE 2 | #endif | | static void yynoreturn yy_fatal_error (const char* msg ) | { | fprintf( stderr, "%s\n", msg ); | exit( YY_EXIT_FAILURE ); | } | | /* Redefine yyless() so it works in section 3 code. */ | | #undef yyless | #define yyless(n) \ | do \ | { \ | /* Undo effects of setting up yytext. */ \ | yy_size_t yyless_macro_arg = (n); \ | YY_LESS_LINENO(yyless_macro_arg);\ | yytext[yyleng] = (yy_hold_char); \ | (yy_c_buf_p) = yytext + yyless_macro_arg; \ | (yy_hold_char) = *(yy_c_buf_p); \ | *(yy_c_buf_p) = '\0'; \ | yyleng = yyless_macro_arg; \ | } \ | while ( 0 ) | | /* Accessor methods (get/set functions) to struct members. */ | | /** Get the current line number. | * | */ | int yyget_lineno (void) | { | | return yylineno; | } | | /** Get the input stream. | * | */ | FILE *yyget_in (void) | { | return yyin; | } | | /** Get the output stream. | * | */ | FILE *yyget_out (void) | { | return yyout; | } | | /** Get the length of the current token. | * | */ | yy_size_t yyget_leng (void) | { | return yyleng; | } | | /** Get the current token. | * | */ | | char *yyget_text (void) | { | return yytext; | } | | /** Set the current line number. | * @param _line_number line number | * | */ | void yyset_lineno (int _line_number ) | { | | yylineno = _line_number; | } | | /** Set the input stream. This does not discard the current | * input buffer. | * @param _in_str A readable stream. | * | * @see yy_switch_to_buffer | */ | void yyset_in (FILE * _in_str ) | { | yyin = _in_str ; | } | | void yyset_out (FILE * _out_str ) | { | yyout = _out_str ; | } | | int yyget_debug (void) | { | return yy_flex_debug; | } | | void yyset_debug (int _bdebug ) | { | yy_flex_debug = _bdebug ; | } | | static int yy_init_globals (void) | { | /* Initialization is the same as for the non-reentrant scanner. | * This function is called from yylex_destroy(), so don't allocate here. | */ | | (yy_buffer_stack) = NULL; | (yy_buffer_stack_top) = 0; | (yy_buffer_stack_max) = 0; | (yy_c_buf_p) = NULL; | (yy_init) = 0; | (yy_start) = 0; | | (yy_state_buf) = 0; | (yy_state_ptr) = 0; | (yy_full_match) = 0; | (yy_lp) = 0; | | /* Defined in main.c */ | #ifdef YY_STDINIT | yyin = stdin; | yyout = stdout; | #else | yyin = NULL; | yyout = NULL; | #endif | | /* For future reference: Set errno on error, since we are called by | * yylex_init() | */ | return 0; | } | | /* yylex_destroy is for both reentrant and non-reentrant scanners. */ | int yylex_destroy (void) | { | | /* Pop the buffer stack, destroying each element. */ | while(YY_CURRENT_BUFFER){ | yy_delete_buffer( YY_CURRENT_BUFFER ); | YY_CURRENT_BUFFER_LVALUE = NULL; | yypop_buffer_state(); | } | | /* Destroy the stack itself. */ | yyfree((yy_buffer_stack) ); | (yy_buffer_stack) = NULL; | | yyfree ( (yy_state_buf) ); | (yy_state_buf) = NULL; | | /* Reset the globals. This is important in a non-reentrant scanner so the next time | * yylex() is called, initialization will occur. */ | yy_init_globals( ); | | return 0; | } | | /* | * Internal utility routines. | */ | | #ifndef yytext_ptr | static void yy_flex_strncpy (char* s1, const char * s2, int n ) | { | | int i; | for ( i = 0; i < n; ++i ) | s1[i] = s2[i]; | } | #endif | | #ifdef YY_NEED_STRLEN | static int yy_flex_strlen (const char * s ) | { | int n; | for ( n = 0; s[n]; ++n ) | ; | | return n; | } | #endif | | void *yyalloc (yy_size_t size ) | { | return malloc(size); | } | | void *yyrealloc (void * ptr, yy_size_t size ) | { | | /* The cast to (char *) in the following accommodates both | * implementations that use char* generic pointers, and those | * that use void* generic pointers. It works with the latter | * because both ANSI C and C++ allow castless assignment from | * any pointer type to void*, and deal with argument conversions | * as though doing an assignment. | */ | return realloc(ptr, size); | } | | void yyfree (void * ptr ) | { | free( (char *) ptr ); /* see yyrealloc() for (char *) cast */ | } | | #define YYTABLES_NAME "yytables" | | #line 10 "conftest.l" | | #ifdef YYTEXT_POINTER | extern char *yytext; | #endif | int | main (void) | { | return ! yylex () + ! yywrap (); | } configure:6761: gcc -o conftest -g -O2 conftest.c -lfl -L. >&5 ld: library not found for -lfl collect2: error: ld returned 1 exit status configure:6761: $? = 1 configure: failed program was: | /* confdefs.h */ | #define PACKAGE_NAME "The XMM-Newton Science Analysis System" | #define PACKAGE_TARNAME "sas" | #define PACKAGE_VERSION "21.0.0" | #define PACKAGE_STRING "The XMM-Newton Science Analysis System 21.0.0" | #define PACKAGE_BUGREPORT "xmmhelp@sciops.esa.int" | #define PACKAGE_URL "https://www.cosmos.esa.int/web/xmm-newton/sas-news" | #define MACOSX 1 | /* end confdefs.h. */ | | #line 2 "lex.yy.c" | | #define YY_INT_ALIGNED short int | | /* A lexical scanner generated by flex */ | | #define FLEX_SCANNER | #define YY_FLEX_MAJOR_VERSION 2 | #define YY_FLEX_MINOR_VERSION 6 | #define YY_FLEX_SUBMINOR_VERSION 4 | #if YY_FLEX_SUBMINOR_VERSION > 0 | #define FLEX_BETA | #endif | | /* First, we deal with platform-specific or compiler-specific issues. */ | | /* begin standard C headers. */ | #include | #include | #include | #include | | /* end standard C headers. */ | | /* flex integer type definitions */ | | #ifndef FLEXINT_H | #define FLEXINT_H | | /* C99 systems have . Non-C99 systems may or may not. */ | | #if defined (__STDC_VERSION__) && __STDC_VERSION__ >= 199901L | | /* C99 says to define __STDC_LIMIT_MACROS before including stdint.h, | * if you want the limit (max/min) macros for int types. | */ | #ifndef __STDC_LIMIT_MACROS | #define __STDC_LIMIT_MACROS 1 | #endif | | #include | typedef int8_t flex_int8_t; | typedef uint8_t flex_uint8_t; | typedef int16_t flex_int16_t; | typedef uint16_t flex_uint16_t; | typedef int32_t flex_int32_t; | typedef uint32_t flex_uint32_t; | typedef uint64_t flex_uint64_t; | #else | typedef signed char flex_int8_t; | typedef short int flex_int16_t; | typedef int flex_int32_t; | typedef unsigned char flex_uint8_t; | typedef unsigned short int flex_uint16_t; | typedef unsigned int flex_uint32_t; | | /* Limits of integral types. */ | #ifndef INT8_MIN | #define INT8_MIN (-128) | #endif | #ifndef INT16_MIN | #define INT16_MIN (-32767-1) | #endif | #ifndef INT32_MIN | #define INT32_MIN (-2147483647-1) | #endif | #ifndef INT8_MAX | #define INT8_MAX (127) | #endif | #ifndef INT16_MAX | #define INT16_MAX (32767) | #endif | #ifndef INT32_MAX | #define INT32_MAX (2147483647) | #endif | #ifndef UINT8_MAX | #define UINT8_MAX (255U) | #endif | #ifndef UINT16_MAX | #define UINT16_MAX (65535U) | #endif | #ifndef UINT32_MAX | #define UINT32_MAX (4294967295U) | #endif | | #ifndef SIZE_MAX | #define SIZE_MAX (~(size_t)0) | #endif | | #endif /* ! C99 */ | | #endif /* ! FLEXINT_H */ | | /* begin standard C++ headers. */ | | /* TODO: this is always defined, so inline it */ | #define yyconst const | | #if defined(__GNUC__) && __GNUC__ >= 3 | #define yynoreturn __attribute__((__noreturn__)) | #else | #define yynoreturn | #endif | | /* Returned upon end-of-file. */ | #define YY_NULL 0 | | /* Promotes a possibly negative, possibly signed char to an | * integer in range [0..255] for use as an array index. | */ | #define YY_SC_TO_UI(c) ((YY_CHAR) (c)) | | /* Enter a start condition. This macro really ought to take a parameter, | * but we do it the disgusting crufty way forced on us by the ()-less | * definition of BEGIN. | */ | #define BEGIN (yy_start) = 1 + 2 * | /* Translate the current start state into a value that can be later handed | * to BEGIN to return to the state. The YYSTATE alias is for lex | * compatibility. | */ | #define YY_START (((yy_start) - 1) / 2) | #define YYSTATE YY_START | /* Action number for EOF rule of a given start state. */ | #define YY_STATE_EOF(state) (YY_END_OF_BUFFER + state + 1) | /* Special action meaning "start processing a new file". */ | #define YY_NEW_FILE yyrestart( yyin ) | #define YY_END_OF_BUFFER_CHAR 0 | | /* Size of default input buffer. */ | #ifndef YY_BUF_SIZE | #ifdef __ia64__ | /* On IA-64, the buffer size is 16k, not 8k. | * Moreover, YY_BUF_SIZE is 2*YY_READ_BUF_SIZE in the general case. | * Ditto for the __ia64__ case accordingly. | */ | #define YY_BUF_SIZE 32768 | #else | #define YY_BUF_SIZE 16384 | #endif /* __ia64__ */ | #endif | | /* The state buf must be large enough to hold one state per character in the main buffer. | */ | #define YY_STATE_BUF_SIZE ((YY_BUF_SIZE + 2) * sizeof(yy_state_type)) | | #ifndef YY_TYPEDEF_YY_BUFFER_STATE | #define YY_TYPEDEF_YY_BUFFER_STATE | typedef struct yy_buffer_state *YY_BUFFER_STATE; | #endif | | #ifndef YY_TYPEDEF_YY_SIZE_T | #define YY_TYPEDEF_YY_SIZE_T | typedef size_t yy_size_t; | #endif | | extern yy_size_t yyleng; | | extern FILE *yyin, *yyout; | | #define EOB_ACT_CONTINUE_SCAN 0 | #define EOB_ACT_END_OF_FILE 1 | #define EOB_ACT_LAST_MATCH 2 | | #define YY_LESS_LINENO(n) | #define YY_LINENO_REWIND_TO(ptr) | | /* Return all but the first "n" matched characters back to the input stream. */ | #define yyless(n) \ | do \ | { \ | /* Undo effects of setting up yytext. */ \ | int yyless_macro_arg = (n); \ | YY_LESS_LINENO(yyless_macro_arg);\ | *yy_cp = (yy_hold_char); \ | YY_RESTORE_YY_MORE_OFFSET \ | (yy_c_buf_p) = yy_cp = yy_bp + yyless_macro_arg - YY_MORE_ADJ; \ | YY_DO_BEFORE_ACTION; /* set up yytext again */ \ | } \ | while ( 0 ) | #define unput(c) yyunput( c, (yytext_ptr) ) | | #ifndef YY_STRUCT_YY_BUFFER_STATE | #define YY_STRUCT_YY_BUFFER_STATE | struct yy_buffer_state | { | FILE *yy_input_file; | | char *yy_ch_buf; /* input buffer */ | char *yy_buf_pos; /* current position in input buffer */ | | /* Size of input buffer in bytes, not including room for EOB | * characters. | */ | int yy_buf_size; | | /* Number of characters read into yy_ch_buf, not including EOB | * characters. | */ | yy_size_t yy_n_chars; | | /* Whether we "own" the buffer - i.e., we know we created it, | * and can realloc() it to grow it, and should free() it to | * delete it. | */ | int yy_is_our_buffer; | | /* Whether this is an "interactive" input source; if so, and | * if we're using stdio for input, then we want to use getc() | * instead of fread(), to make sure we stop fetching input after | * each newline. | */ | int yy_is_interactive; | | /* Whether we're considered to be at the beginning of a line. | * If so, '^' rules will be active on the next match, otherwise | * not. | */ | int yy_at_bol; | | int yy_bs_lineno; /**< The line count. */ | int yy_bs_column; /**< The column count. */ | | /* Whether to try to fill the input buffer when we reach the | * end of it. | */ | int yy_fill_buffer; | | int yy_buffer_status; | | #define YY_BUFFER_NEW 0 | #define YY_BUFFER_NORMAL 1 | /* When an EOF's been seen but there's still some text to process | * then we mark the buffer as YY_EOF_PENDING, to indicate that we | * shouldn't try reading from the input source any more. We might | * still have a bunch of tokens to match, though, because of | * possible backing-up. | * | * When we actually see the EOF, we change the status to "new" | * (via yyrestart()), so that the user can continue scanning by | * just pointing yyin at a new input file. | */ | #define YY_BUFFER_EOF_PENDING 2 | | }; | #endif /* !YY_STRUCT_YY_BUFFER_STATE */ | | /* Stack of input buffers. */ | static size_t yy_buffer_stack_top = 0; /**< index of top of stack. */ | static size_t yy_buffer_stack_max = 0; /**< capacity of stack. */ | static YY_BUFFER_STATE * yy_buffer_stack = NULL; /**< Stack as an array. */ | | /* We provide macros for accessing buffer states in case in the | * future we want to put the buffer states in a more general | * "scanner state". | * | * Returns the top of the stack, or NULL. | */ | #define YY_CURRENT_BUFFER ( (yy_buffer_stack) \ | ? (yy_buffer_stack)[(yy_buffer_stack_top)] \ | : NULL) | /* Same as previous macro, but useful when we know that the buffer stack is not | * NULL or when we need an lvalue. For internal use only. | */ | #define YY_CURRENT_BUFFER_LVALUE (yy_buffer_stack)[(yy_buffer_stack_top)] | | /* yy_hold_char holds the character lost when yytext is formed. */ | static char yy_hold_char; | static yy_size_t yy_n_chars; /* number of characters read into yy_ch_buf */ | yy_size_t yyleng; | | /* Points to current character in buffer. */ | static char *yy_c_buf_p = NULL; | static int yy_init = 0; /* whether we need to initialize */ | static int yy_start = 0; /* start state number */ | | /* Flag which is used to allow yywrap()'s to do buffer switches | * instead of setting up a fresh yyin. A bit of a hack ... | */ | static int yy_did_buffer_switch_on_eof; | | void yyrestart ( FILE *input_file ); | void yy_switch_to_buffer ( YY_BUFFER_STATE new_buffer ); | YY_BUFFER_STATE yy_create_buffer ( FILE *file, int size ); | void yy_delete_buffer ( YY_BUFFER_STATE b ); | void yy_flush_buffer ( YY_BUFFER_STATE b ); | void yypush_buffer_state ( YY_BUFFER_STATE new_buffer ); | void yypop_buffer_state ( void ); | | static void yyensure_buffer_stack ( void ); | static void yy_load_buffer_state ( void ); | static void yy_init_buffer ( YY_BUFFER_STATE b, FILE *file ); | #define YY_FLUSH_BUFFER yy_flush_buffer( YY_CURRENT_BUFFER ) | | YY_BUFFER_STATE yy_scan_buffer ( char *base, yy_size_t size ); | YY_BUFFER_STATE yy_scan_string ( const char *yy_str ); | YY_BUFFER_STATE yy_scan_bytes ( const char *bytes, yy_size_t len ); | | void *yyalloc ( yy_size_t ); | void *yyrealloc ( void *, yy_size_t ); | void yyfree ( void * ); | | #define yy_new_buffer yy_create_buffer | #define yy_set_interactive(is_interactive) \ | { \ | if ( ! YY_CURRENT_BUFFER ){ \ | yyensure_buffer_stack (); \ | YY_CURRENT_BUFFER_LVALUE = \ | yy_create_buffer( yyin, YY_BUF_SIZE ); \ | } \ | YY_CURRENT_BUFFER_LVALUE->yy_is_interactive = is_interactive; \ | } | #define yy_set_bol(at_bol) \ | { \ | if ( ! YY_CURRENT_BUFFER ){\ | yyensure_buffer_stack (); \ | YY_CURRENT_BUFFER_LVALUE = \ | yy_create_buffer( yyin, YY_BUF_SIZE ); \ | } \ | YY_CURRENT_BUFFER_LVALUE->yy_at_bol = at_bol; \ | } | #define YY_AT_BOL() (YY_CURRENT_BUFFER_LVALUE->yy_at_bol) | | /* Begin user sect3 */ | typedef flex_uint8_t YY_CHAR; | | FILE *yyin = NULL, *yyout = NULL; | | typedef int yy_state_type; | | extern int yylineno; | int yylineno = 1; | | extern char *yytext; | #ifdef yytext_ptr | #undef yytext_ptr | #endif | #define yytext_ptr yytext | | static yy_state_type yy_get_previous_state ( void ); | static yy_state_type yy_try_NUL_trans ( yy_state_type current_state ); | static int yy_get_next_buffer ( void ); | static void yynoreturn yy_fatal_error ( const char* msg ); | | /* Done after the current pattern has been matched and before the | * corresponding action - sets up yytext. | */ | #define YY_DO_BEFORE_ACTION \ | (yytext_ptr) = yy_bp; \ | (yytext_ptr) -= (yy_more_len); \ | yyleng = (yy_size_t) (yy_cp - (yytext_ptr)); \ | (yy_hold_char) = *yy_cp; \ | *yy_cp = '\0'; \ | (yy_c_buf_p) = yy_cp; | #define YY_NUM_RULES 8 | #define YY_END_OF_BUFFER 9 | /* This struct is not used in this scanner, | but its presence is necessary. */ | struct yy_trans_info | { | flex_int32_t yy_verify; | flex_int32_t yy_nxt; | }; | static const flex_int16_t yy_acclist[23] = | { 0, | 9, 7, 8, 8, 1, 7, 8, 2, 7, 8, | 3, 7, 8, 4, 7, 8, 5, 7, 8, 6, | 7, 8 | } ; | | static const flex_int16_t yy_accept[14] = | { 0, | 1, 1, 1, 2, 4, 5, 8, 11, 14, 17, | 20, 23, 23 | } ; | | static const YY_CHAR yy_ec[256] = | { 0, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 2, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 3, 4, 5, 6, | | 7, 8, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1 | } ; | | static const YY_CHAR yy_meta[9] = | { 0, | 1, 1, 1, 1, 1, 1, 1, 1 | } ; | | static const flex_int16_t yy_base[13] = | { 0, | 0, 0, 9, 10, 10, 10, 10, 10, 10, 10, | 10, 10 | } ; | | static const flex_int16_t yy_def[13] = | { 0, | 12, 1, 12, 12, 12, 12, 12, 12, 12, 12, | 12, 0 | } ; | | static const flex_int16_t yy_nxt[19] = | { 0, | 4, 5, 6, 7, 8, 9, 10, 11, 12, 3, | 12, 12, 12, 12, 12, 12, 12, 12 | } ; | | static const flex_int16_t yy_chk[19] = | { 0, | 1, 1, 1, 1, 1, 1, 1, 1, 3, 12, | 12, 12, 12, 12, 12, 12, 12, 12 | } ; | | extern int yy_flex_debug; | int yy_flex_debug = 0; | | static yy_state_type *yy_state_buf=0, *yy_state_ptr=0; | static char *yy_full_match; | static int yy_lp; | #define REJECT \ | { \ | *yy_cp = (yy_hold_char); /* undo effects of setting up yytext */ \ | yy_cp = (yy_full_match); /* restore poss. backed-over text */ \ | ++(yy_lp); \ | goto find_rule; \ | } | | static int yy_more_flag = 0; | static int yy_more_len = 0; | #define yymore() ((yy_more_flag) = 1) | #define YY_MORE_ADJ (yy_more_len) | #define YY_RESTORE_YY_MORE_OFFSET | char *yytext; | #line 1 "conftest.l" | #line 460 "lex.yy.c" | | #define INITIAL 0 | | #ifndef YY_NO_UNISTD_H | /* Special case for "unistd.h", since it is non-ANSI. We include it way | * down here because we want the user's section 1 to have been scanned first. | * The user has a chance to override it with an option. | */ | #include | #endif | | #ifndef YY_EXTRA_TYPE | #define YY_EXTRA_TYPE void * | #endif | | static int yy_init_globals ( void ); | | /* Accessor methods to globals. | These are made visible to non-reentrant scanners for convenience. */ | | int yylex_destroy ( void ); | | int yyget_debug ( void ); | | void yyset_debug ( int debug_flag ); | | YY_EXTRA_TYPE yyget_extra ( void ); | | void yyset_extra ( YY_EXTRA_TYPE user_defined ); | | FILE *yyget_in ( void ); | | void yyset_in ( FILE * _in_str ); | | FILE *yyget_out ( void ); | | void yyset_out ( FILE * _out_str ); | | yy_size_t yyget_leng ( void ); | | char *yyget_text ( void ); | | int yyget_lineno ( void ); | | void yyset_lineno ( int _line_number ); | | /* Macros after this point can all be overridden by user definitions in | * section 1. | */ | | #ifndef YY_SKIP_YYWRAP | #ifdef __cplusplus | extern "C" int yywrap ( void ); | #else | extern int yywrap ( void ); | #endif | #endif | | #ifndef YY_NO_UNPUT | | static void yyunput ( int c, char *buf_ptr ); | | #endif | | #ifndef yytext_ptr | static void yy_flex_strncpy ( char *, const char *, int ); | #endif | | #ifdef YY_NEED_STRLEN | static int yy_flex_strlen ( const char * ); | #endif | | #ifndef YY_NO_INPUT | #ifdef __cplusplus | static int yyinput ( void ); | #else | static int input ( void ); | #endif | | #endif | | /* Amount of stuff to slurp up with each read. */ | #ifndef YY_READ_BUF_SIZE | #ifdef __ia64__ | /* On IA-64, the buffer size is 16k, not 8k */ | #define YY_READ_BUF_SIZE 16384 | #else | #define YY_READ_BUF_SIZE 8192 | #endif /* __ia64__ */ | #endif | | /* Copy whatever the last rule matched to the standard output. */ | #ifndef ECHO | /* This used to be an fputs(), but since the string might contain NUL's, | * we now use fwrite(). | */ | #define ECHO do { if (fwrite( yytext, (size_t) yyleng, 1, yyout )) {} } while (0) | #endif | | /* Gets input and stuffs it into "buf". number of characters read, or YY_NULL, | * is returned in "result". | */ | #ifndef YY_INPUT | #define YY_INPUT(buf,result,max_size) \ | if ( YY_CURRENT_BUFFER_LVALUE->yy_is_interactive ) \ | { \ | int c = '*'; \ | yy_size_t n; \ | for ( n = 0; n < max_size && \ | (c = getc( yyin )) != EOF && c != '\n'; ++n ) \ | buf[n] = (char) c; \ | if ( c == '\n' ) \ | buf[n++] = (char) c; \ | if ( c == EOF && ferror( yyin ) ) \ | YY_FATAL_ERROR( "input in flex scanner failed" ); \ | result = n; \ | } \ | else \ | { \ | errno=0; \ | while ( (result = (int) fread(buf, 1, (yy_size_t) max_size, yyin)) == 0 && ferror(yyin)) \ | { \ | if( errno != EINTR) \ | { \ | YY_FATAL_ERROR( "input in flex scanner failed" ); \ | break; \ | } \ | errno=0; \ | clearerr(yyin); \ | } \ | }\ | \ | | #endif | | /* No semi-colon after return; correct usage is to write "yyterminate();" - | * we don't want an extra ';' after the "return" because that will cause | * some compilers to complain about unreachable statements. | */ | #ifndef yyterminate | #define yyterminate() return YY_NULL | #endif | | /* Number of entries by which start-condition stack grows. */ | #ifndef YY_START_STACK_INCR | #define YY_START_STACK_INCR 25 | #endif | | /* Report a fatal error. */ | #ifndef YY_FATAL_ERROR | #define YY_FATAL_ERROR(msg) yy_fatal_error( msg ) | #endif | | /* end tables serialization structures and prototypes */ | | /* Default declaration of generated scanner - a define so the user can | * easily add parameters. | */ | #ifndef YY_DECL | #define YY_DECL_IS_OURS 1 | | extern int yylex (void); | | #define YY_DECL int yylex (void) | #endif /* !YY_DECL */ | | /* Code executed at the beginning of each rule, after yytext and yyleng | * have been set up. | */ | #ifndef YY_USER_ACTION | #define YY_USER_ACTION | #endif | | /* Code executed at the end of each rule. */ | #ifndef YY_BREAK | #define YY_BREAK /*LINTED*/break; | #endif | | #define YY_RULE_SETUP \ | YY_USER_ACTION | | /** The main scanner function which does all the work. | */ | YY_DECL | { | yy_state_type yy_current_state; | char *yy_cp, *yy_bp; | int yy_act; | | if ( !(yy_init) ) | { | (yy_init) = 1; | | #ifdef YY_USER_INIT | YY_USER_INIT; | #endif | | /* Create the reject buffer large enough to save one state per allowed character. */ | if ( ! (yy_state_buf) ) | (yy_state_buf) = (yy_state_type *)yyalloc(YY_STATE_BUF_SIZE ); | if ( ! (yy_state_buf) ) | YY_FATAL_ERROR( "out of dynamic memory in yylex()" ); | | if ( ! (yy_start) ) | (yy_start) = 1; /* first start state */ | | if ( ! yyin ) | yyin = stdin; | | if ( ! yyout ) | yyout = stdout; | | if ( ! YY_CURRENT_BUFFER ) { | yyensure_buffer_stack (); | YY_CURRENT_BUFFER_LVALUE = | yy_create_buffer( yyin, YY_BUF_SIZE ); | } | | yy_load_buffer_state( ); | } | | { | #line 1 "conftest.l" | | #line 685 "lex.yy.c" | | while ( /*CONSTCOND*/1 ) /* loops until end-of-file is reached */ | { | (yy_more_len) = 0; | if ( (yy_more_flag) ) | { | (yy_more_len) = (int) ((yy_c_buf_p) - (yytext_ptr)); | (yy_more_flag) = 0; | } | yy_cp = (yy_c_buf_p); | | /* Support of yytext. */ | *yy_cp = (yy_hold_char); | | /* yy_bp points to the position in yy_ch_buf of the start of | * the current run. | */ | yy_bp = yy_cp; | | yy_current_state = (yy_start); | | (yy_state_ptr) = (yy_state_buf); | *(yy_state_ptr)++ = yy_current_state; | | yy_match: | do | { | YY_CHAR yy_c = yy_ec[YY_SC_TO_UI(*yy_cp)] ; | while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state ) | { | yy_current_state = (int) yy_def[yy_current_state]; | if ( yy_current_state >= 13 ) | yy_c = yy_meta[yy_c]; | } | yy_current_state = yy_nxt[yy_base[yy_current_state] + yy_c]; | *(yy_state_ptr)++ = yy_current_state; | ++yy_cp; | } | while ( yy_base[yy_current_state] != 10 ); | | yy_find_action: | yy_current_state = *--(yy_state_ptr); | (yy_lp) = yy_accept[yy_current_state]; | | goto find_rule; /* Shut up GCC warning -Wall */ | find_rule: /* we branch to this label when backing up */ | | for ( ; ; ) /* until we find what rule we matched */ | { | if ( (yy_lp) && (yy_lp) < yy_accept[yy_current_state + 1] ) | { | yy_act = yy_acclist[(yy_lp)]; | { | (yy_full_match) = yy_cp; | break; | } | } | --yy_cp; | yy_current_state = *--(yy_state_ptr); | (yy_lp) = yy_accept[yy_current_state]; | } | | YY_DO_BEFORE_ACTION; | | do_action: /* This label is used only to access EOF actions. */ | | switch ( yy_act ) | { /* beginning of action switch */ | case 1: | YY_RULE_SETUP | #line 2 "conftest.l" | { ECHO; } | YY_BREAK | case 2: | YY_RULE_SETUP | #line 3 "conftest.l" | { REJECT; } | YY_BREAK | case 3: | YY_RULE_SETUP | #line 4 "conftest.l" | { yymore (); } | YY_BREAK | case 4: | YY_RULE_SETUP | #line 5 "conftest.l" | { yyless (1); } | YY_BREAK | case 5: | YY_RULE_SETUP | #line 6 "conftest.l" | { /* IRIX 6.5 flex 2.5.4 underquotes its yyless argument. */ | yyless ((input () != 0)); } | YY_BREAK | case 6: | YY_RULE_SETUP | #line 8 "conftest.l" | { unput (yytext[0]); } | YY_BREAK | case 7: | YY_RULE_SETUP | #line 9 "conftest.l" | { BEGIN INITIAL; } | YY_BREAK | case 8: | YY_RULE_SETUP | #line 10 "conftest.l" | ECHO; | YY_BREAK | #line 795 "lex.yy.c" | case YY_STATE_EOF(INITIAL): | yyterminate(); | | case YY_END_OF_BUFFER: | { | /* Amount of text matched not including the EOB char. */ | int yy_amount_of_matched_text = (int) (yy_cp - (yytext_ptr)) - 1; | | /* Undo the effects of YY_DO_BEFORE_ACTION. */ | *yy_cp = (yy_hold_char); | YY_RESTORE_YY_MORE_OFFSET | | if ( YY_CURRENT_BUFFER_LVALUE->yy_buffer_status == YY_BUFFER_NEW ) | { | /* We're scanning a new file or input source. It's | * possible that this happened because the user | * just pointed yyin at a new source and called | * yylex(). If so, then we have to assure | * consistency between YY_CURRENT_BUFFER and our | * globals. Here is the right place to do so, because | * this is the first action (other than possibly a | * back-up) that will match for the new input source. | */ | (yy_n_chars) = YY_CURRENT_BUFFER_LVALUE->yy_n_chars; | YY_CURRENT_BUFFER_LVALUE->yy_input_file = yyin; | YY_CURRENT_BUFFER_LVALUE->yy_buffer_status = YY_BUFFER_NORMAL; | } | | /* Note that here we test for yy_c_buf_p "<=" to the position | * of the first EOB in the buffer, since yy_c_buf_p will | * already have been incremented past the NUL character | * (since all states make transitions on EOB to the | * end-of-buffer state). Contrast this with the test | * in input(). | */ | if ( (yy_c_buf_p) <= &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)] ) | { /* This was really a NUL. */ | yy_state_type yy_next_state; | | (yy_c_buf_p) = (yytext_ptr) + yy_amount_of_matched_text; | | yy_current_state = yy_get_previous_state( ); | | /* Okay, we're now positioned to make the NUL | * transition. We couldn't have | * yy_get_previous_state() go ahead and do it | * for us because it doesn't know how to deal | * with the possibility of jamming (and we don't | * want to build jamming into it because then it | * will run more slowly). | */ | | yy_next_state = yy_try_NUL_trans( yy_current_state ); | | yy_bp = (yytext_ptr) + YY_MORE_ADJ; | | if ( yy_next_state ) | { | /* Consume the NUL. */ | yy_cp = ++(yy_c_buf_p); | yy_current_state = yy_next_state; | goto yy_match; | } | | else | { | yy_cp = (yy_c_buf_p); | goto yy_find_action; | } | } | | else switch ( yy_get_next_buffer( ) ) | { | case EOB_ACT_END_OF_FILE: | { | (yy_did_buffer_switch_on_eof) = 0; | | if ( yywrap( ) ) | { | /* Note: because we've taken care in | * yy_get_next_buffer() to have set up | * yytext, we can now set up | * yy_c_buf_p so that if some total | * hoser (like flex itself) wants to | * call the scanner after we return the | * YY_NULL, it'll still work - another | * YY_NULL will get returned. | */ | (yy_c_buf_p) = (yytext_ptr) + YY_MORE_ADJ; | | yy_act = YY_STATE_EOF(YY_START); | goto do_action; | } | | else | { | if ( ! (yy_did_buffer_switch_on_eof) ) | YY_NEW_FILE; | } | break; | } | | case EOB_ACT_CONTINUE_SCAN: | (yy_c_buf_p) = | (yytext_ptr) + yy_amount_of_matched_text; | | yy_current_state = yy_get_previous_state( ); | | yy_cp = (yy_c_buf_p); | yy_bp = (yytext_ptr) + YY_MORE_ADJ; | goto yy_match; | | case EOB_ACT_LAST_MATCH: | (yy_c_buf_p) = | &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)]; | | yy_current_state = yy_get_previous_state( ); | | yy_cp = (yy_c_buf_p); | yy_bp = (yytext_ptr) + YY_MORE_ADJ; | goto yy_find_action; | } | break; | } | | default: | YY_FATAL_ERROR( | "fatal flex scanner internal error--no action found" ); | } /* end of action switch */ | } /* end of scanning one token */ | } /* end of user's declarations */ | } /* end of yylex */ | | /* yy_get_next_buffer - try to read in a new buffer | * | * Returns a code representing an action: | * EOB_ACT_LAST_MATCH - | * EOB_ACT_CONTINUE_SCAN - continue scanning from current position | * EOB_ACT_END_OF_FILE - end of file | */ | static int yy_get_next_buffer (void) | { | char *dest = YY_CURRENT_BUFFER_LVALUE->yy_ch_buf; | char *source = (yytext_ptr); | int number_to_move, i; | int ret_val; | | if ( (yy_c_buf_p) > &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars) + 1] ) | YY_FATAL_ERROR( | "fatal flex scanner internal error--end of buffer missed" ); | | if ( YY_CURRENT_BUFFER_LVALUE->yy_fill_buffer == 0 ) | { /* Don't try to fill the buffer, so this is an EOF. */ | if ( (yy_c_buf_p) - (yytext_ptr) - YY_MORE_ADJ == 1 ) | { | /* We matched a single character, the EOB, so | * treat this as a final EOF. | */ | return EOB_ACT_END_OF_FILE; | } | | else | { | /* We matched some text prior to the EOB, first | * process it. | */ | return EOB_ACT_LAST_MATCH; | } | } | | /* Try to read more data. */ | | /* First move last chars to start of buffer. */ | number_to_move = (int) ((yy_c_buf_p) - (yytext_ptr) - 1); | | for ( i = 0; i < number_to_move; ++i ) | *(dest++) = *(source++); | | if ( YY_CURRENT_BUFFER_LVALUE->yy_buffer_status == YY_BUFFER_EOF_PENDING ) | /* don't do the read, it's not guaranteed to return an EOF, | * just force an EOF | */ | YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars) = 0; | | else | { | yy_size_t num_to_read = | YY_CURRENT_BUFFER_LVALUE->yy_buf_size - number_to_move - 1; | | while ( num_to_read <= 0 ) | { /* Not enough room in the buffer - grow it. */ | | YY_FATAL_ERROR( | "input buffer overflow, can't enlarge buffer because scanner uses REJECT" ); | | } | | if ( num_to_read > YY_READ_BUF_SIZE ) | num_to_read = YY_READ_BUF_SIZE; | | /* Read in more data. */ | YY_INPUT( (&YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[number_to_move]), | (yy_n_chars), num_to_read ); | | YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars); | } | | if ( (yy_n_chars) == 0 ) | { | if ( number_to_move == YY_MORE_ADJ ) | { | ret_val = EOB_ACT_END_OF_FILE; | yyrestart( yyin ); | } | | else | { | ret_val = EOB_ACT_LAST_MATCH; | YY_CURRENT_BUFFER_LVALUE->yy_buffer_status = | YY_BUFFER_EOF_PENDING; | } | } | | else | ret_val = EOB_ACT_CONTINUE_SCAN; | | if (((yy_n_chars) + number_to_move) > YY_CURRENT_BUFFER_LVALUE->yy_buf_size) { | /* Extend the array by 50%, plus the number we really need. */ | yy_size_t new_size = (yy_n_chars) + number_to_move + ((yy_n_chars) >> 1); | YY_CURRENT_BUFFER_LVALUE->yy_ch_buf = (char *) yyrealloc( | (void *) YY_CURRENT_BUFFER_LVALUE->yy_ch_buf, (yy_size_t) new_size ); | if ( ! YY_CURRENT_BUFFER_LVALUE->yy_ch_buf ) | YY_FATAL_ERROR( "out of dynamic memory in yy_get_next_buffer()" ); | /* "- 2" to take care of EOB's */ | YY_CURRENT_BUFFER_LVALUE->yy_buf_size = (int) (new_size - 2); | } | | (yy_n_chars) += number_to_move; | YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)] = YY_END_OF_BUFFER_CHAR; | YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars) + 1] = YY_END_OF_BUFFER_CHAR; | | (yytext_ptr) = &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[0]; | | return ret_val; | } | | /* yy_get_previous_state - get the state just before the EOB char was reached */ | | static yy_state_type yy_get_previous_state (void) | { | yy_state_type yy_current_state; | char *yy_cp; | | yy_current_state = (yy_start); | | (yy_state_ptr) = (yy_state_buf); | *(yy_state_ptr)++ = yy_current_state; | | for ( yy_cp = (yytext_ptr) + YY_MORE_ADJ; yy_cp < (yy_c_buf_p); ++yy_cp ) | { | YY_CHAR yy_c = (*yy_cp ? yy_ec[YY_SC_TO_UI(*yy_cp)] : 1); | while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state ) | { | yy_current_state = (int) yy_def[yy_current_state]; | if ( yy_current_state >= 13 ) | yy_c = yy_meta[yy_c]; | } | yy_current_state = yy_nxt[yy_base[yy_current_state] + yy_c]; | *(yy_state_ptr)++ = yy_current_state; | } | | return yy_current_state; | } | | /* yy_try_NUL_trans - try to make a transition on the NUL character | * | * synopsis | * next_state = yy_try_NUL_trans( current_state ); | */ | static yy_state_type yy_try_NUL_trans (yy_state_type yy_current_state ) | { | int yy_is_jam; | | YY_CHAR yy_c = 1; | while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state ) | { | yy_current_state = (int) yy_def[yy_current_state]; | if ( yy_current_state >= 13 ) | yy_c = yy_meta[yy_c]; | } | yy_current_state = yy_nxt[yy_base[yy_current_state] + yy_c]; | yy_is_jam = (yy_current_state == 12); | if ( ! yy_is_jam ) | *(yy_state_ptr)++ = yy_current_state; | | return yy_is_jam ? 0 : yy_current_state; | } | | #ifndef YY_NO_UNPUT | | static void yyunput (int c, char * yy_bp ) | { | char *yy_cp; | | yy_cp = (yy_c_buf_p); | | /* undo effects of setting up yytext */ | *yy_cp = (yy_hold_char); | | if ( yy_cp < YY_CURRENT_BUFFER_LVALUE->yy_ch_buf + 2 ) | { /* need to shift things up to make room */ | /* +2 for EOB chars. */ | yy_size_t number_to_move = (yy_n_chars) + 2; | char *dest = &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[ | YY_CURRENT_BUFFER_LVALUE->yy_buf_size + 2]; | char *source = | &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[number_to_move]; | | while ( source > YY_CURRENT_BUFFER_LVALUE->yy_ch_buf ) | *--dest = *--source; | | yy_cp += (int) (dest - source); | yy_bp += (int) (dest - source); | YY_CURRENT_BUFFER_LVALUE->yy_n_chars = | (yy_n_chars) = (int) YY_CURRENT_BUFFER_LVALUE->yy_buf_size; | | if ( yy_cp < YY_CURRENT_BUFFER_LVALUE->yy_ch_buf + 2 ) | YY_FATAL_ERROR( "flex scanner push-back overflow" ); | } | | *--yy_cp = (char) c; | | (yytext_ptr) = yy_bp; | (yy_hold_char) = *yy_cp; | (yy_c_buf_p) = yy_cp; | } | | #endif | | #ifndef YY_NO_INPUT | #ifdef __cplusplus | static int yyinput (void) | #else | static int input (void) | #endif | | { | int c; | | *(yy_c_buf_p) = (yy_hold_char); | | if ( *(yy_c_buf_p) == YY_END_OF_BUFFER_CHAR ) | { | /* yy_c_buf_p now points to the character we want to return. | * If this occurs *before* the EOB characters, then it's a | * valid NUL; if not, then we've hit the end of the buffer. | */ | if ( (yy_c_buf_p) < &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)] ) | /* This was really a NUL. */ | *(yy_c_buf_p) = '\0'; | | else | { /* need more input */ | yy_size_t offset = (yy_c_buf_p) - (yytext_ptr); | ++(yy_c_buf_p); | | switch ( yy_get_next_buffer( ) ) | { | case EOB_ACT_LAST_MATCH: | /* This happens because yy_g_n_b() | * sees that we've accumulated a | * token and flags that we need to | * try matching the token before | * proceeding. But for input(), | * there's no matching to consider. | * So convert the EOB_ACT_LAST_MATCH | * to EOB_ACT_END_OF_FILE. | */ | | /* Reset buffer status. */ | yyrestart( yyin ); | | /*FALLTHROUGH*/ | | case EOB_ACT_END_OF_FILE: | { | if ( yywrap( ) ) | return 0; | | if ( ! (yy_did_buffer_switch_on_eof) ) | YY_NEW_FILE; | #ifdef __cplusplus | return yyinput(); | #else | return input(); | #endif | } | | case EOB_ACT_CONTINUE_SCAN: | (yy_c_buf_p) = (yytext_ptr) + offset; | break; | } | } | } | | c = *(unsigned char *) (yy_c_buf_p); /* cast for 8-bit char's */ | *(yy_c_buf_p) = '\0'; /* preserve yytext */ | (yy_hold_char) = *++(yy_c_buf_p); | | return c; | } | #endif /* ifndef YY_NO_INPUT */ | | /** Immediately switch to a different input stream. | * @param input_file A readable stream. | * | * @note This function does not reset the start condition to @c INITIAL . | */ | void yyrestart (FILE * input_file ) | { | | if ( ! YY_CURRENT_BUFFER ){ | yyensure_buffer_stack (); | YY_CURRENT_BUFFER_LVALUE = | yy_create_buffer( yyin, YY_BUF_SIZE ); | } | | yy_init_buffer( YY_CURRENT_BUFFER, input_file ); | yy_load_buffer_state( ); | } | | /** Switch to a different input buffer. | * @param new_buffer The new input buffer. | * | */ | void yy_switch_to_buffer (YY_BUFFER_STATE new_buffer ) | { | | /* TODO. We should be able to replace this entire function body | * with | * yypop_buffer_state(); | * yypush_buffer_state(new_buffer); | */ | yyensure_buffer_stack (); | if ( YY_CURRENT_BUFFER == new_buffer ) | return; | | if ( YY_CURRENT_BUFFER ) | { | /* Flush out information for old buffer. */ | *(yy_c_buf_p) = (yy_hold_char); | YY_CURRENT_BUFFER_LVALUE->yy_buf_pos = (yy_c_buf_p); | YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars); | } | | YY_CURRENT_BUFFER_LVALUE = new_buffer; | yy_load_buffer_state( ); | | /* We don't actually know whether we did this switch during | * EOF (yywrap()) processing, but the only time this flag | * is looked at is after yywrap() is called, so it's safe | * to go ahead and always set it. | */ | (yy_did_buffer_switch_on_eof) = 1; | } | | static void yy_load_buffer_state (void) | { | (yy_n_chars) = YY_CURRENT_BUFFER_LVALUE->yy_n_chars; | (yytext_ptr) = (yy_c_buf_p) = YY_CURRENT_BUFFER_LVALUE->yy_buf_pos; | yyin = YY_CURRENT_BUFFER_LVALUE->yy_input_file; | (yy_hold_char) = *(yy_c_buf_p); | } | | /** Allocate and initialize an input buffer state. | * @param file A readable stream. | * @param size The character buffer size in bytes. When in doubt, use @c YY_BUF_SIZE. | * | * @return the allocated buffer state. | */ | YY_BUFFER_STATE yy_create_buffer (FILE * file, int size ) | { | YY_BUFFER_STATE b; | | b = (YY_BUFFER_STATE) yyalloc( sizeof( struct yy_buffer_state ) ); | if ( ! b ) | YY_FATAL_ERROR( "out of dynamic memory in yy_create_buffer()" ); | | b->yy_buf_size = size; | | /* yy_ch_buf has to be 2 characters longer than the size given because | * we need to put in 2 end-of-buffer characters. | */ | b->yy_ch_buf = (char *) yyalloc( (yy_size_t) (b->yy_buf_size + 2) ); | if ( ! b->yy_ch_buf ) | YY_FATAL_ERROR( "out of dynamic memory in yy_create_buffer()" ); | | b->yy_is_our_buffer = 1; | | yy_init_buffer( b, file ); | | return b; | } | | /** Destroy the buffer. | * @param b a buffer created with yy_create_buffer() | * | */ | void yy_delete_buffer (YY_BUFFER_STATE b ) | { | | if ( ! b ) | return; | | if ( b == YY_CURRENT_BUFFER ) /* Not sure if we should pop here. */ | YY_CURRENT_BUFFER_LVALUE = (YY_BUFFER_STATE) 0; | | if ( b->yy_is_our_buffer ) | yyfree( (void *) b->yy_ch_buf ); | | yyfree( (void *) b ); | } | | /* Initializes or reinitializes a buffer. | * This function is sometimes called more than once on the same buffer, | * such as during a yyrestart() or at EOF. | */ | static void yy_init_buffer (YY_BUFFER_STATE b, FILE * file ) | | { | int oerrno = errno; | | yy_flush_buffer( b ); | | b->yy_input_file = file; | b->yy_fill_buffer = 1; | | /* If b is the current buffer, then yy_init_buffer was _probably_ | * called from yyrestart() or through yy_get_next_buffer. | * In that case, we don't want to reset the lineno or column. | */ | if (b != YY_CURRENT_BUFFER){ | b->yy_bs_lineno = 1; | b->yy_bs_column = 0; | } | | b->yy_is_interactive = file ? (isatty( fileno(file) ) > 0) : 0; | | errno = oerrno; | } | | /** Discard all buffered characters. On the next scan, YY_INPUT will be called. | * @param b the buffer state to be flushed, usually @c YY_CURRENT_BUFFER. | * | */ | void yy_flush_buffer (YY_BUFFER_STATE b ) | { | if ( ! b ) | return; | | b->yy_n_chars = 0; | | /* We always need two end-of-buffer characters. The first causes | * a transition to the end-of-buffer state. The second causes | * a jam in that state. | */ | b->yy_ch_buf[0] = YY_END_OF_BUFFER_CHAR; | b->yy_ch_buf[1] = YY_END_OF_BUFFER_CHAR; | | b->yy_buf_pos = &b->yy_ch_buf[0]; | | b->yy_at_bol = 1; | b->yy_buffer_status = YY_BUFFER_NEW; | | if ( b == YY_CURRENT_BUFFER ) | yy_load_buffer_state( ); | } | | /** Pushes the new state onto the stack. The new state becomes | * the current state. This function will allocate the stack | * if necessary. | * @param new_buffer The new state. | * | */ | void yypush_buffer_state (YY_BUFFER_STATE new_buffer ) | { | if (new_buffer == NULL) | return; | | yyensure_buffer_stack(); | | /* This block is copied from yy_switch_to_buffer. */ | if ( YY_CURRENT_BUFFER ) | { | /* Flush out information for old buffer. */ | *(yy_c_buf_p) = (yy_hold_char); | YY_CURRENT_BUFFER_LVALUE->yy_buf_pos = (yy_c_buf_p); | YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars); | } | | /* Only push if top exists. Otherwise, replace top. */ | if (YY_CURRENT_BUFFER) | (yy_buffer_stack_top)++; | YY_CURRENT_BUFFER_LVALUE = new_buffer; | | /* copied from yy_switch_to_buffer. */ | yy_load_buffer_state( ); | (yy_did_buffer_switch_on_eof) = 1; | } | | /** Removes and deletes the top of the stack, if present. | * The next element becomes the new top. | * | */ | void yypop_buffer_state (void) | { | if (!YY_CURRENT_BUFFER) | return; | | yy_delete_buffer(YY_CURRENT_BUFFER ); | YY_CURRENT_BUFFER_LVALUE = NULL; | if ((yy_buffer_stack_top) > 0) | --(yy_buffer_stack_top); | | if (YY_CURRENT_BUFFER) { | yy_load_buffer_state( ); | (yy_did_buffer_switch_on_eof) = 1; | } | } | | /* Allocates the stack if it does not exist. | * Guarantees space for at least one push. | */ | static void yyensure_buffer_stack (void) | { | yy_size_t num_to_alloc; | | if (!(yy_buffer_stack)) { | | /* First allocation is just for 2 elements, since we don't know if this | * scanner will even need a stack. We use 2 instead of 1 to avoid an | * immediate realloc on the next call. | */ | num_to_alloc = 1; /* After all that talk, this was set to 1 anyways... */ | (yy_buffer_stack) = (struct yy_buffer_state**)yyalloc | (num_to_alloc * sizeof(struct yy_buffer_state*) | ); | if ( ! (yy_buffer_stack) ) | YY_FATAL_ERROR( "out of dynamic memory in yyensure_buffer_stack()" ); | | memset((yy_buffer_stack), 0, num_to_alloc * sizeof(struct yy_buffer_state*)); | | (yy_buffer_stack_max) = num_to_alloc; | (yy_buffer_stack_top) = 0; | return; | } | | if ((yy_buffer_stack_top) >= ((yy_buffer_stack_max)) - 1){ | | /* Increase the buffer to prepare for a possible push. */ | yy_size_t grow_size = 8 /* arbitrary grow size */; | | num_to_alloc = (yy_buffer_stack_max) + grow_size; | (yy_buffer_stack) = (struct yy_buffer_state**)yyrealloc | ((yy_buffer_stack), | num_to_alloc * sizeof(struct yy_buffer_state*) | ); | if ( ! (yy_buffer_stack) ) | YY_FATAL_ERROR( "out of dynamic memory in yyensure_buffer_stack()" ); | | /* zero only the new slots.*/ | memset((yy_buffer_stack) + (yy_buffer_stack_max), 0, grow_size * sizeof(struct yy_buffer_state*)); | (yy_buffer_stack_max) = num_to_alloc; | } | } | | /** Setup the input buffer state to scan directly from a user-specified character buffer. | * @param base the character buffer | * @param size the size in bytes of the character buffer | * | * @return the newly allocated buffer state object. | */ | YY_BUFFER_STATE yy_scan_buffer (char * base, yy_size_t size ) | { | YY_BUFFER_STATE b; | | if ( size < 2 || | base[size-2] != YY_END_OF_BUFFER_CHAR || | base[size-1] != YY_END_OF_BUFFER_CHAR ) | /* They forgot to leave room for the EOB's. */ | return NULL; | | b = (YY_BUFFER_STATE) yyalloc( sizeof( struct yy_buffer_state ) ); | if ( ! b ) | YY_FATAL_ERROR( "out of dynamic memory in yy_scan_buffer()" ); | | b->yy_buf_size = (int) (size - 2); /* "- 2" to take care of EOB's */ | b->yy_buf_pos = b->yy_ch_buf = base; | b->yy_is_our_buffer = 0; | b->yy_input_file = NULL; | b->yy_n_chars = b->yy_buf_size; | b->yy_is_interactive = 0; | b->yy_at_bol = 1; | b->yy_fill_buffer = 0; | b->yy_buffer_status = YY_BUFFER_NEW; | | yy_switch_to_buffer( b ); | | return b; | } | | /** Setup the input buffer state to scan a string. The next call to yylex() will | * scan from a @e copy of @a str. | * @param yystr a NUL-terminated string to scan | * | * @return the newly allocated buffer state object. | * @note If you want to scan bytes that may contain NUL values, then use | * yy_scan_bytes() instead. | */ | YY_BUFFER_STATE yy_scan_string (const char * yystr ) | { | | return yy_scan_bytes( yystr, (int) strlen(yystr) ); | } | | /** Setup the input buffer state to scan the given bytes. The next call to yylex() will | * scan from a @e copy of @a bytes. | * @param yybytes the byte buffer to scan | * @param _yybytes_len the number of bytes in the buffer pointed to by @a bytes. | * | * @return the newly allocated buffer state object. | */ | YY_BUFFER_STATE yy_scan_bytes (const char * yybytes, yy_size_t _yybytes_len ) | { | YY_BUFFER_STATE b; | char *buf; | yy_size_t n; | yy_size_t i; | | /* Get memory for full buffer, including space for trailing EOB's. */ | n = (yy_size_t) (_yybytes_len + 2); | buf = (char *) yyalloc( n ); | if ( ! buf ) | YY_FATAL_ERROR( "out of dynamic memory in yy_scan_bytes()" ); | | for ( i = 0; i < _yybytes_len; ++i ) | buf[i] = yybytes[i]; | | buf[_yybytes_len] = buf[_yybytes_len+1] = YY_END_OF_BUFFER_CHAR; | | b = yy_scan_buffer( buf, n ); | if ( ! b ) | YY_FATAL_ERROR( "bad buffer in yy_scan_bytes()" ); | | /* It's okay to grow etc. this buffer, and we should throw it | * away when we're done. | */ | b->yy_is_our_buffer = 1; | | return b; | } | | #ifndef YY_EXIT_FAILURE | #define YY_EXIT_FAILURE 2 | #endif | | static void yynoreturn yy_fatal_error (const char* msg ) | { | fprintf( stderr, "%s\n", msg ); | exit( YY_EXIT_FAILURE ); | } | | /* Redefine yyless() so it works in section 3 code. */ | | #undef yyless | #define yyless(n) \ | do \ | { \ | /* Undo effects of setting up yytext. */ \ | yy_size_t yyless_macro_arg = (n); \ | YY_LESS_LINENO(yyless_macro_arg);\ | yytext[yyleng] = (yy_hold_char); \ | (yy_c_buf_p) = yytext + yyless_macro_arg; \ | (yy_hold_char) = *(yy_c_buf_p); \ | *(yy_c_buf_p) = '\0'; \ | yyleng = yyless_macro_arg; \ | } \ | while ( 0 ) | | /* Accessor methods (get/set functions) to struct members. */ | | /** Get the current line number. | * | */ | int yyget_lineno (void) | { | | return yylineno; | } | | /** Get the input stream. | * | */ | FILE *yyget_in (void) | { | return yyin; | } | | /** Get the output stream. | * | */ | FILE *yyget_out (void) | { | return yyout; | } | | /** Get the length of the current token. | * | */ | yy_size_t yyget_leng (void) | { | return yyleng; | } | | /** Get the current token. | * | */ | | char *yyget_text (void) | { | return yytext; | } | | /** Set the current line number. | * @param _line_number line number | * | */ | void yyset_lineno (int _line_number ) | { | | yylineno = _line_number; | } | | /** Set the input stream. This does not discard the current | * input buffer. | * @param _in_str A readable stream. | * | * @see yy_switch_to_buffer | */ | void yyset_in (FILE * _in_str ) | { | yyin = _in_str ; | } | | void yyset_out (FILE * _out_str ) | { | yyout = _out_str ; | } | | int yyget_debug (void) | { | return yy_flex_debug; | } | | void yyset_debug (int _bdebug ) | { | yy_flex_debug = _bdebug ; | } | | static int yy_init_globals (void) | { | /* Initialization is the same as for the non-reentrant scanner. | * This function is called from yylex_destroy(), so don't allocate here. | */ | | (yy_buffer_stack) = NULL; | (yy_buffer_stack_top) = 0; | (yy_buffer_stack_max) = 0; | (yy_c_buf_p) = NULL; | (yy_init) = 0; | (yy_start) = 0; | | (yy_state_buf) = 0; | (yy_state_ptr) = 0; | (yy_full_match) = 0; | (yy_lp) = 0; | | /* Defined in main.c */ | #ifdef YY_STDINIT | yyin = stdin; | yyout = stdout; | #else | yyin = NULL; | yyout = NULL; | #endif | | /* For future reference: Set errno on error, since we are called by | * yylex_init() | */ | return 0; | } | | /* yylex_destroy is for both reentrant and non-reentrant scanners. */ | int yylex_destroy (void) | { | | /* Pop the buffer stack, destroying each element. */ | while(YY_CURRENT_BUFFER){ | yy_delete_buffer( YY_CURRENT_BUFFER ); | YY_CURRENT_BUFFER_LVALUE = NULL; | yypop_buffer_state(); | } | | /* Destroy the stack itself. */ | yyfree((yy_buffer_stack) ); | (yy_buffer_stack) = NULL; | | yyfree ( (yy_state_buf) ); | (yy_state_buf) = NULL; | | /* Reset the globals. This is important in a non-reentrant scanner so the next time | * yylex() is called, initialization will occur. */ | yy_init_globals( ); | | return 0; | } | | /* | * Internal utility routines. | */ | | #ifndef yytext_ptr | static void yy_flex_strncpy (char* s1, const char * s2, int n ) | { | | int i; | for ( i = 0; i < n; ++i ) | s1[i] = s2[i]; | } | #endif | | #ifdef YY_NEED_STRLEN | static int yy_flex_strlen (const char * s ) | { | int n; | for ( n = 0; s[n]; ++n ) | ; | | return n; | } | #endif | | void *yyalloc (yy_size_t size ) | { | return malloc(size); | } | | void *yyrealloc (void * ptr, yy_size_t size ) | { | | /* The cast to (char *) in the following accommodates both | * implementations that use char* generic pointers, and those | * that use void* generic pointers. It works with the latter | * because both ANSI C and C++ allow castless assignment from | * any pointer type to void*, and deal with argument conversions | * as though doing an assignment. | */ | return realloc(ptr, size); | } | | void yyfree (void * ptr ) | { | free( (char *) ptr ); /* see yyrealloc() for (char *) cast */ | } | | #define YYTABLES_NAME "yytables" | | #line 10 "conftest.l" | | #ifdef YYTEXT_POINTER | extern char *yytext; | #endif | int | main (void) | { | return ! yylex () + ! yywrap (); | } configure:6761: gcc -o conftest -g -O2 conftest.c -ll -L. >&5 configure:6761: $? = 0 configure:6771: result: -ll configure:6777: checking whether yytext is a pointer configure:6794: gcc -o conftest -g -O2 conftest.c -ll -L. >&5 configure:6794: $? = 0 configure:6802: result: yes configure:6816: checking for bison configure:6832: found /usr/bin/bison configure:6843: result: bison -y configure:6869: checking for a BSD-compatible install configure:6937: result: /Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/coreutils/bin/install -c configure:6948: checking whether ln -s works configure:6952: result: yes configure:7002: checking for ranlib configure:7018: found /usr/bin/ranlib configure:7029: result: ranlib configure:7055: checking for echo configure:7073: found /Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/coreutils/bin/echo configure:7086: result: /Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/coreutils/bin/echo configure:7113: checking for patch configure:7129: found /usr/bin/patch configure:7140: result: patch configure:7163: checking whether your environment sets SAS_PERL configure:7171: result: yes configure:7175: WARNING: SAS_PERL is defined! Perl tasks could use its value! configure:7199: checking if you have perl version 5.005 or higher configure:7201: /Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/perl/bin/perl -e 'require 5.005;' 1>&5 configure:7204: $? = 0 configure:7206: result: yes. configure:7218: WARNING: Good, /Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/perl/bin/perl is statically built! configure:7306: checking the name Perl gives to this architecture configure:7309: result: darwin-2level configure:7314: checking what linker flags are needed to embed Perl configure:7317: result: -mmacosx-version-min=11.6 -fstack-protector-strong -L/sasbuild/local/macOS11/GNU_CC_CXX_9.5.0/perl_5.34.1/lib/5.34.1/darwin-2level/CORE -lperl configure:7320: checking what include flags are needed to embed Perl configure:7323: result: -I/sasbuild/local/macOS11/GNU_CC_CXX_9.5.0/perl_5.34.1/lib/5.34.1/darwin-2level/CORE configure:7343: checking for python configure:7361: found /usr/bin/python configure:7374: result: /usr/bin/python configure:7387: checking the version of python configure:7391: result: 2.7.16 configure:7425: result: Python site-packages are in /usr/lib/python2.7/site-packages configure:7431: checking for main in -lm configure:7450: gcc -o conftest -g -O2 conftest.c -lm -L. >&5 configure:7450: $? = 0 configure:7459: result: yes configure:7470: checking for main in -ldl configure:7489: gcc -o conftest -g -O2 conftest.c -ldl -lm -L. >&5 configure:7489: $? = 0 configure:7498: result: yes configure:7513: checking for main in -lstdc++ configure:7532: gcc -o conftest -g -O2 conftest.c -lstdc++ -ldl -lm -L. >&5 configure:7532: $? = 0 configure:7541: result: yes configure:7559: checking for X configure:7667: gcc -E conftest.c configure:7667: $? = 0 configure:7698: gcc -o conftest -g -O2 conftest.c -lX11 -ldl -lm -L. >&5 configure:7698: $? = 0 configure:7748: result: libraries , headers configure:7761: gcc -E conftest.c conftest.c:14:10: fatal error: X11/XIntrinsic.h: No such file or directory 14 | #include | ^~~~~~~~~~~~~~~~~~ compilation terminated. configure:7761: $? = 1 configure: failed program was: | /* confdefs.h */ | #define PACKAGE_NAME "The XMM-Newton Science Analysis System" | #define PACKAGE_TARNAME "sas" | #define PACKAGE_VERSION "21.0.0" | #define PACKAGE_STRING "The XMM-Newton Science Analysis System 21.0.0" | #define PACKAGE_BUGREPORT "xmmhelp@sciops.esa.int" | #define PACKAGE_URL "https://www.cosmos.esa.int/web/xmm-newton/sas-news" | #define MACOSX 1 | #define YYTEXT_POINTER 1 | #define HAVE_LIBM 1 | #define HAVE_LIBDL 1 | #define HAVE_LIBSTDC__ 1 | /* end confdefs.h. */ | #include configure:7774: checking for X11 header files configure:7781: gcc -E conftest.c configure:7781: $? = 0 configure:7886: checking for main in -lX11 configure:7905: gcc -o conftest -g -O2 conftest.c -lX11 -ldl -lm -L. >&5 configure:7905: $? = 0 configure:7914: result: yes configure:7920: checking for main in -lXext configure:7939: gcc -o conftest -g -O2 conftest.c -lXext -ldl -lm -L. >&5 configure:7939: $? = 0 configure:7948: result: yes configure:7954: checking for main in -lXt configure:7973: gcc -o conftest -g -O2 conftest.c -lXt -ldl -lm -L. >&5 configure:7973: $? = 0 configure:7982: result: yes configure:7988: checking for main in -lXmu configure:8007: gcc -o conftest -g -O2 conftest.c -lXmu -ldl -lm -L. >&5 configure:8007: $? = 0 configure:8016: result: yes configure:8022: checking for main in -lXaw configure:8041: gcc -o conftest -g -O2 conftest.c -lXaw -ldl -lm -L. >&5 configure:8041: $? = 0 configure:8050: result: yes configure:8069: checking for main in -lsocket configure:8088: gcc -o conftest -g -O2 conftest.c -lsocket -ldl -lm -L. >&5 ld: library not found for -lsocket collect2: error: ld returned 1 exit status configure:8088: $? = 1 configure: failed program was: | /* confdefs.h */ | #define PACKAGE_NAME "The XMM-Newton Science Analysis System" | #define PACKAGE_TARNAME "sas" | #define PACKAGE_VERSION "21.0.0" | #define PACKAGE_STRING "The XMM-Newton Science Analysis System 21.0.0" | #define PACKAGE_BUGREPORT "xmmhelp@sciops.esa.int" | #define PACKAGE_URL "https://www.cosmos.esa.int/web/xmm-newton/sas-news" | #define MACOSX 1 | #define YYTEXT_POINTER 1 | #define HAVE_LIBM 1 | #define HAVE_LIBDL 1 | #define HAVE_LIBSTDC__ 1 | /* end confdefs.h. */ | | | int | main () | { | return main (); | ; | return 0; | } configure:8097: result: no configure:8103: checking for main in -lnsl configure:8122: gcc -o conftest -g -O2 conftest.c -lnsl -ldl -lm -L. >&5 ld: library not found for -lnsl collect2: error: ld returned 1 exit status configure:8122: $? = 1 configure: failed program was: | /* confdefs.h */ | #define PACKAGE_NAME "The XMM-Newton Science Analysis System" | #define PACKAGE_TARNAME "sas" | #define PACKAGE_VERSION "21.0.0" | #define PACKAGE_STRING "The XMM-Newton Science Analysis System 21.0.0" | #define PACKAGE_BUGREPORT "xmmhelp@sciops.esa.int" | #define PACKAGE_URL "https://www.cosmos.esa.int/web/xmm-newton/sas-news" | #define MACOSX 1 | #define YYTEXT_POINTER 1 | #define HAVE_LIBM 1 | #define HAVE_LIBDL 1 | #define HAVE_LIBSTDC__ 1 | /* end confdefs.h. */ | | | int | main () | { | return main (); | ; | return 0; | } configure:8131: result: no configure:8137: checking for main in -lcfitsio configure:8156: gcc -o conftest -g -O2 conftest.c -lcfitsio -ldl -lm -L. >&5 configure:8156: $? = 0 configure:8165: result: yes configure:8180: checking for gethostbyname configure:8180: gcc -o conftest -g -O2 conftest.c -lcfitsio -ldl -lm -L. >&5 configure:8180: $? = 0 configure:8180: result: yes configure:8227: checking for connect configure:8227: gcc -o conftest -g -O2 conftest.c -lcfitsio -ldl -lm -L. >&5 configure:8227: $? = 0 configure:8227: result: yes configure:8279: checking for main in -lgfortran configure:8298: gcc -o conftest -g -O2 conftest.c -lgfortran -lcfitsio -ldl -lm -L. >&5 configure:8298: $? = 0 configure:8307: result: yes configure:8321: checking whether a small Fortran 90/95 program can be compiled and linked configure:8336: gfortran -v -c conftest.f90 && gfortran -v -o conftest -g -O2 conftest.o -lgfortran -lcfitsio -ldl -lm -L. 1>&5 Using built-in specs. COLLECT_GCC=gfortran Target: x86_64-apple-darwin20.6.0 Configured with: ../gcc-9.5.0/configure --prefix=/sasbuild/local/macOS11/GNU_CC_CXX_9.5.0/gcc_9.5.0 --with-local-prefix=/sasbuild/local/macOS11/GNU_CC_CXX_9.5.0/gcc_9.5.0 --enable-checking=release --enable-languages=c,c++,fortran --disable-multilib --with-native-system=header-dir=/usr/include --with-sysroot=/Library/Developer/CommandLineTools/SDKs/MacOSX11.sdk Thread model: posix gcc version 9.5.0 (GCC) COLLECT_GCC_OPTIONS='-v' '-c' '-mmacosx-version-min=11.5.0' '-asm_macosx_version_min=11.5' '-mtune=core2' /Volumes/SAS/sasbuild/local/macOS11/GNU_CC_CXX_9.5.0/gcc_9.5.0/bin/../libexec/gcc/x86_64-apple-darwin20.6.0/9.5.0/f951 conftest.f90 -fPIC -quiet -dumpbase conftest.f90 -mmacosx-version-min=11.5.0 -mtune=core2 -auxbase conftest -version -fintrinsic-modules-path /Volumes/SAS/sasbuild/local/macOS11/GNU_CC_CXX_9.5.0/gcc_9.5.0/bin/../lib/gcc/x86_64-apple-darwin20.6.0/9.5.0/finclude -o /var/tmp//cc6s7kc6.s GNU Fortran (GCC) version 9.5.0 (x86_64-apple-darwin20.6.0) compiled by GNU C version 9.5.0, GMP version 6.1.0, MPFR version 3.1.4, MPC version 1.0.3, isl version isl-0.18-GMP GGC heuristics: --param ggc-min-expand=100 --param ggc-min-heapsize=131072 GNU Fortran2008 (GCC) version 9.5.0 (x86_64-apple-darwin20.6.0) compiled by GNU C version 9.5.0, GMP version 6.1.0, MPFR version 3.1.4, MPC version 1.0.3, isl version isl-0.18-GMP GGC heuristics: --param ggc-min-expand=100 --param ggc-min-heapsize=131072 COLLECT_GCC_OPTIONS='-v' '-c' '-mmacosx-version-min=11.5.0' '-mtune=core2' as -arch x86_64 -v -force_cpusubtype_ALL -mmacosx-version-min=11.5 -o conftest.o /var/tmp//cc6s7kc6.s Apple clang version 13.0.0 (clang-1300.0.29.30) Target: x86_64-apple-darwin20.6.0 Thread model: posix InstalledDir: /Applications/Xcode.app/Contents/Developer/Toolchains/XcodeDefault.xctoolchain/usr/bin "/Applications/Xcode.app/Contents/Developer/Toolchains/XcodeDefault.xctoolchain/usr/bin/clang" -cc1as -triple x86_64-apple-macosx11.5.0 -filetype obj -main-file-name cc6s7kc6.s -target-cpu penryn -fdebug-compilation-dir /Volumes/SAS/sasbuild/build/macOS11/GNU_CC_CXX_9.5.0/reltrack_rel_9.5.0_build -dwarf-debug-producer "Apple clang version 13.0.0 (clang-1300.0.29.30)" -dwarf-version=4 -mrelocation-model pic --mrelax-relocations -mllvm -disable-aligned-alloc-awareness=1 -mllvm -enable-dse-memoryssa=0 -o conftest.o /var/tmp//cc6s7kc6.s COMPILER_PATH=/Volumes/SAS/sasbuild/local/macOS11/GNU_CC_CXX_9.5.0/gcc_9.5.0/bin/../libexec/gcc/x86_64-apple-darwin20.6.0/9.5.0/:/Volumes/SAS/sasbuild/local/macOS11/GNU_CC_CXX_9.5.0/gcc_9.5.0/bin/../libexec/gcc/ LIBRARY_PATH=/Volumes/SAS/sasbuild/local/macOS11/GNU_CC_CXX_9.5.0/gcc_9.5.0/bin/../lib/gcc/x86_64-apple-darwin20.6.0/9.5.0/:/Volumes/SAS/sasbuild/local/macOS11/GNU_CC_CXX_9.5.0/gcc_9.5.0/bin/../lib/gcc/:/Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/pgplot/lib/:/Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/tiff/lib/:/Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/netpbm/lib/:/Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/libtool/lib/:/Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/libpng/lib/:/Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/lesstif/lib/:/Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/jpeg/lib/:/Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/grace/lib/:/Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/qt-x11-free/lib/:/Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/fftw/lib/:/Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/cfitsio/lib/:/Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/gcc/lib/:/opt/X11/lib/:/Volumes/SAS/sasbuild/local/macOS11/GNU_CC_CXX_9.5.0/gcc_9.5.0/bin/../lib/gcc/x86_64-apple-darwin20.6.0/9.5.0/../../../ COLLECT_GCC_OPTIONS='-v' '-c' '-mmacosx-version-min=11.5.0' '-mtune=core2' Driving: gfortran -v -o conftest -g -O2 conftest.o -l gfortran -lcfitsio -ldl -lm -L. -mmacosx-version-min=11.5.0 -asm_macosx_version_min=11.5 -l gfortran -shared-libgcc Using built-in specs. COLLECT_GCC=gfortran COLLECT_LTO_WRAPPER=/Volumes/SAS/sasbuild/local/macOS11/GNU_CC_CXX_9.5.0/gcc_9.5.0/bin/../libexec/gcc/x86_64-apple-darwin20.6.0/9.5.0/lto-wrapper Target: x86_64-apple-darwin20.6.0 Configured with: ../gcc-9.5.0/configure --prefix=/sasbuild/local/macOS11/GNU_CC_CXX_9.5.0/gcc_9.5.0 --with-local-prefix=/sasbuild/local/macOS11/GNU_CC_CXX_9.5.0/gcc_9.5.0 --enable-checking=release --enable-languages=c,c++,fortran --disable-multilib --with-native-system=header-dir=/usr/include --with-sysroot=/Library/Developer/CommandLineTools/SDKs/MacOSX11.sdk Thread model: posix gcc version 9.5.0 (GCC) Reading specs from /Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/gcc/lib/libgfortran.spec rename spec lib to liborig COLLECT_GCC_OPTIONS='-v' '-o' 'conftest' '-g' '-O2' '-L.' '-mmacosx-version-min=11.5.0' '-asm_macosx_version_min=11.5' '-shared-libgcc' '-mtune=core2' COMPILER_PATH=/Volumes/SAS/sasbuild/local/macOS11/GNU_CC_CXX_9.5.0/gcc_9.5.0/bin/../libexec/gcc/x86_64-apple-darwin20.6.0/9.5.0/:/Volumes/SAS/sasbuild/local/macOS11/GNU_CC_CXX_9.5.0/gcc_9.5.0/bin/../libexec/gcc/ LIBRARY_PATH=/Volumes/SAS/sasbuild/local/macOS11/GNU_CC_CXX_9.5.0/gcc_9.5.0/bin/../lib/gcc/x86_64-apple-darwin20.6.0/9.5.0/:/Volumes/SAS/sasbuild/local/macOS11/GNU_CC_CXX_9.5.0/gcc_9.5.0/bin/../lib/gcc/:/Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/pgplot/lib/:/Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/tiff/lib/:/Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/netpbm/lib/:/Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/libtool/lib/:/Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/libpng/lib/:/Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/lesstif/lib/:/Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/jpeg/lib/:/Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/grace/lib/:/Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/qt-x11-free/lib/:/Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/fftw/lib/:/Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/cfitsio/lib/:/Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/gcc/lib/:/opt/X11/lib/:/Volumes/SAS/sasbuild/local/macOS11/GNU_CC_CXX_9.5.0/gcc_9.5.0/bin/../lib/gcc/x86_64-apple-darwin20.6.0/9.5.0/../../../ COLLECT_GCC_OPTIONS='-v' '-o' 'conftest' '-g' '-O2' '-L.' '-mmacosx-version-min=11.5.0' '-asm_macosx_version_min=11.5' '-shared-libgcc' '-mtune=core2' /Volumes/SAS/sasbuild/local/macOS11/GNU_CC_CXX_9.5.0/gcc_9.5.0/bin/../libexec/gcc/x86_64-apple-darwin20.6.0/9.5.0/collect2 -syslibroot /Library/Developer/CommandLineTools/SDKs/MacOSX11.sdk/ -dynamic -arch x86_64 -macosx_version_min 11.5.0 -weak_reference_mismatches non-weak -o conftest -L. -L/Volumes/SAS/sasbuild/local/macOS11/GNU_CC_CXX_9.5.0/gcc_9.5.0/bin/../lib/gcc/x86_64-apple-darwin20.6.0/9.5.0 -L/Volumes/SAS/sasbuild/local/macOS11/GNU_CC_CXX_9.5.0/gcc_9.5.0/bin/../lib/gcc -L/Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/pgplot/lib -L/Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/tiff/lib -L/Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/netpbm/lib -L/Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/libtool/lib -L/Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/libpng/lib -L/Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/lesstif/lib -L/Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/jpeg/lib -L/Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/grace/lib -L/Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/qt-x11-free/lib -L/Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/fftw/lib -L/Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/cfitsio/lib -L/Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/gcc/lib -L/opt/X11/lib -L/Volumes/SAS/sasbuild/local/macOS11/GNU_CC_CXX_9.5.0/gcc_9.5.0/bin/../lib/gcc/x86_64-apple-darwin20.6.0/9.5.0/../../.. conftest.o -lgfortran -lcfitsio -lgfortran -lSystem -lgcc_ext.10.5 -lgcc -lquadmath -lm -lgcc_ext.10.5 -lgcc -lSystem -no_compact_unwind -v -idsym collect2 version 9.5.0 /usr/bin/ld -syslibroot /Library/Developer/CommandLineTools/SDKs/MacOSX11.sdk/ -dynamic -arch x86_64 -macosx_version_min 11.5.0 -weak_reference_mismatches non-weak -o conftest -L. -L/Volumes/SAS/sasbuild/local/macOS11/GNU_CC_CXX_9.5.0/gcc_9.5.0/bin/../lib/gcc/x86_64-apple-darwin20.6.0/9.5.0 -L/Volumes/SAS/sasbuild/local/macOS11/GNU_CC_CXX_9.5.0/gcc_9.5.0/bin/../lib/gcc -L/Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/pgplot/lib -L/Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/tiff/lib -L/Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/netpbm/lib -L/Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/libtool/lib -L/Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/libpng/lib -L/Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/lesstif/lib -L/Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/jpeg/lib -L/Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/grace/lib -L/Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/qt-x11-free/lib -L/Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/fftw/lib -L/Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/cfitsio/lib -L/Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/gcc/lib -L/opt/X11/lib -L/Volumes/SAS/sasbuild/local/macOS11/GNU_CC_CXX_9.5.0/gcc_9.5.0/bin/../lib/gcc/x86_64-apple-darwin20.6.0/9.5.0/../../.. conftest.o -lgfortran -lcfitsio -lgfortran -lSystem -lgcc_ext.10.5 -lgcc -lquadmath -lm -lgcc_ext.10.5 -lgcc -lSystem -no_compact_unwind -v @(#)PROGRAM:ld PROJECT:ld64-711 BUILD 21:57:11 Nov 17 2021 configured to support archs: armv6 armv7 armv7s arm64 arm64e arm64_32 i386 x86_64 x86_64h armv6m armv7k armv7m armv7em Library search paths: . /Volumes/SAS/sasbuild/local/macOS11/GNU_CC_CXX_9.5.0/gcc_9.5.0/lib/gcc/x86_64-apple-darwin20.6.0/9.5.0 /Volumes/SAS/sasbuild/local/macOS11/GNU_CC_CXX_9.5.0/gcc_9.5.0/lib/gcc /Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/pgplot/lib /Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/tiff/lib /Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/netpbm/lib /Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/libtool/lib /Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/libpng/lib /Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/lesstif/lib /Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/jpeg/lib /Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/grace/lib /Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/qt-x11-free/lib /Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/fftw/lib /Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/cfitsio/lib /Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/gcc/lib /opt/X11/lib /Volumes/SAS/sasbuild/local/macOS11/GNU_CC_CXX_9.5.0/gcc_9.5.0/lib /Library/Developer/CommandLineTools/SDKs/MacOSX11.sdk/usr/lib Framework search paths: /Library/Developer/CommandLineTools/SDKs/MacOSX11.sdk/System/Library/Frameworks/ configure:8339: $? = 0 configure:8342: result: yes configure:8361: checking for main in -lgfortran configure:8389: result: yes configure:8408: checking for main in -lcpgplot configure:8427: gcc -o conftest -g -O2 conftest.c -lcpgplot -L/Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/gcc/lib -lgfortran -lgfortran -lcfitsio -ldl -lm -L. -lXaw -lXmu -lXt -lXext -lX11 >&5 configure:8427: $? = 0 configure:8436: result: yes configure:8446: checking for main in -lgfortran configure:8474: result: yes configure:8492: checking whether a small pgplot program can be compiled and linked configure:8507: gfortran -v -c conftest.f90 && gfortran -v -o conftest -g -O2 conftest.o -L/Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/gcc/lib -lgfortran -lgfortran -lcfitsio -ldl -lm -L. -lXaw -lXmu -lXt -lXext -lX11 -lpng -lz -lpgplot 1>&5 Using built-in specs. COLLECT_GCC=gfortran Target: x86_64-apple-darwin20.6.0 Configured with: ../gcc-9.5.0/configure --prefix=/sasbuild/local/macOS11/GNU_CC_CXX_9.5.0/gcc_9.5.0 --with-local-prefix=/sasbuild/local/macOS11/GNU_CC_CXX_9.5.0/gcc_9.5.0 --enable-checking=release --enable-languages=c,c++,fortran --disable-multilib --with-native-system=header-dir=/usr/include --with-sysroot=/Library/Developer/CommandLineTools/SDKs/MacOSX11.sdk Thread model: posix gcc version 9.5.0 (GCC) COLLECT_GCC_OPTIONS='-v' '-c' '-mmacosx-version-min=11.5.0' '-asm_macosx_version_min=11.5' '-mtune=core2' /Volumes/SAS/sasbuild/local/macOS11/GNU_CC_CXX_9.5.0/gcc_9.5.0/bin/../libexec/gcc/x86_64-apple-darwin20.6.0/9.5.0/f951 conftest.f90 -fPIC -quiet -dumpbase conftest.f90 -mmacosx-version-min=11.5.0 -mtune=core2 -auxbase conftest -version -fintrinsic-modules-path /Volumes/SAS/sasbuild/local/macOS11/GNU_CC_CXX_9.5.0/gcc_9.5.0/bin/../lib/gcc/x86_64-apple-darwin20.6.0/9.5.0/finclude -o /var/tmp//ccvgtCYb.s GNU Fortran (GCC) version 9.5.0 (x86_64-apple-darwin20.6.0) compiled by GNU C version 9.5.0, GMP version 6.1.0, MPFR version 3.1.4, MPC version 1.0.3, isl version isl-0.18-GMP GGC heuristics: --param ggc-min-expand=100 --param ggc-min-heapsize=131072 GNU Fortran2008 (GCC) version 9.5.0 (x86_64-apple-darwin20.6.0) compiled by GNU C version 9.5.0, GMP version 6.1.0, MPFR version 3.1.4, MPC version 1.0.3, isl version isl-0.18-GMP GGC heuristics: --param ggc-min-expand=100 --param ggc-min-heapsize=131072 COLLECT_GCC_OPTIONS='-v' '-c' '-mmacosx-version-min=11.5.0' '-mtune=core2' as -arch x86_64 -v -force_cpusubtype_ALL -mmacosx-version-min=11.5 -o conftest.o /var/tmp//ccvgtCYb.s Apple clang version 13.0.0 (clang-1300.0.29.30) Target: x86_64-apple-darwin20.6.0 Thread model: posix InstalledDir: /Applications/Xcode.app/Contents/Developer/Toolchains/XcodeDefault.xctoolchain/usr/bin "/Applications/Xcode.app/Contents/Developer/Toolchains/XcodeDefault.xctoolchain/usr/bin/clang" -cc1as -triple x86_64-apple-macosx11.5.0 -filetype obj -main-file-name ccvgtCYb.s -target-cpu penryn -fdebug-compilation-dir /Volumes/SAS/sasbuild/build/macOS11/GNU_CC_CXX_9.5.0/reltrack_rel_9.5.0_build -dwarf-debug-producer "Apple clang version 13.0.0 (clang-1300.0.29.30)" -dwarf-version=4 -mrelocation-model pic --mrelax-relocations -mllvm -disable-aligned-alloc-awareness=1 -mllvm -enable-dse-memoryssa=0 -o conftest.o /var/tmp//ccvgtCYb.s COMPILER_PATH=/Volumes/SAS/sasbuild/local/macOS11/GNU_CC_CXX_9.5.0/gcc_9.5.0/bin/../libexec/gcc/x86_64-apple-darwin20.6.0/9.5.0/:/Volumes/SAS/sasbuild/local/macOS11/GNU_CC_CXX_9.5.0/gcc_9.5.0/bin/../libexec/gcc/ LIBRARY_PATH=/Volumes/SAS/sasbuild/local/macOS11/GNU_CC_CXX_9.5.0/gcc_9.5.0/bin/../lib/gcc/x86_64-apple-darwin20.6.0/9.5.0/:/Volumes/SAS/sasbuild/local/macOS11/GNU_CC_CXX_9.5.0/gcc_9.5.0/bin/../lib/gcc/:/Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/pgplot/lib/:/Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/tiff/lib/:/Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/netpbm/lib/:/Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/libtool/lib/:/Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/libpng/lib/:/Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/lesstif/lib/:/Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/jpeg/lib/:/Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/grace/lib/:/Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/qt-x11-free/lib/:/Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/fftw/lib/:/Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/cfitsio/lib/:/Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/gcc/lib/:/opt/X11/lib/:/Volumes/SAS/sasbuild/local/macOS11/GNU_CC_CXX_9.5.0/gcc_9.5.0/bin/../lib/gcc/x86_64-apple-darwin20.6.0/9.5.0/../../../ COLLECT_GCC_OPTIONS='-v' '-c' '-mmacosx-version-min=11.5.0' '-mtune=core2' Driving: gfortran -v -o conftest -g -O2 conftest.o -L/Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/gcc/lib -l gfortran -l gfortran -lcfitsio -ldl -lm -L. -lXaw -lXmu -lXt -lXext -lX11 -lpng -lz -lpgplot -mmacosx-version-min=11.5.0 -asm_macosx_version_min=11.5 -l gfortran -shared-libgcc Using built-in specs. COLLECT_GCC=gfortran COLLECT_LTO_WRAPPER=/Volumes/SAS/sasbuild/local/macOS11/GNU_CC_CXX_9.5.0/gcc_9.5.0/bin/../libexec/gcc/x86_64-apple-darwin20.6.0/9.5.0/lto-wrapper Target: x86_64-apple-darwin20.6.0 Configured with: ../gcc-9.5.0/configure --prefix=/sasbuild/local/macOS11/GNU_CC_CXX_9.5.0/gcc_9.5.0 --with-local-prefix=/sasbuild/local/macOS11/GNU_CC_CXX_9.5.0/gcc_9.5.0 --enable-checking=release --enable-languages=c,c++,fortran --disable-multilib --with-native-system=header-dir=/usr/include --with-sysroot=/Library/Developer/CommandLineTools/SDKs/MacOSX11.sdk Thread model: posix gcc version 9.5.0 (GCC) Reading specs from /Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/gcc/lib/libgfortran.spec rename spec lib to liborig COLLECT_GCC_OPTIONS='-v' '-o' 'conftest' '-g' '-O2' '-L/Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/gcc/lib' '-L.' '-mmacosx-version-min=11.5.0' '-asm_macosx_version_min=11.5' '-shared-libgcc' '-mtune=core2' COMPILER_PATH=/Volumes/SAS/sasbuild/local/macOS11/GNU_CC_CXX_9.5.0/gcc_9.5.0/bin/../libexec/gcc/x86_64-apple-darwin20.6.0/9.5.0/:/Volumes/SAS/sasbuild/local/macOS11/GNU_CC_CXX_9.5.0/gcc_9.5.0/bin/../libexec/gcc/ LIBRARY_PATH=/Volumes/SAS/sasbuild/local/macOS11/GNU_CC_CXX_9.5.0/gcc_9.5.0/bin/../lib/gcc/x86_64-apple-darwin20.6.0/9.5.0/:/Volumes/SAS/sasbuild/local/macOS11/GNU_CC_CXX_9.5.0/gcc_9.5.0/bin/../lib/gcc/:/Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/pgplot/lib/:/Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/tiff/lib/:/Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/netpbm/lib/:/Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/libtool/lib/:/Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/libpng/lib/:/Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/lesstif/lib/:/Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/jpeg/lib/:/Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/grace/lib/:/Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/qt-x11-free/lib/:/Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/fftw/lib/:/Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/cfitsio/lib/:/Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/gcc/lib/:/opt/X11/lib/:/Volumes/SAS/sasbuild/local/macOS11/GNU_CC_CXX_9.5.0/gcc_9.5.0/bin/../lib/gcc/x86_64-apple-darwin20.6.0/9.5.0/../../../ COLLECT_GCC_OPTIONS='-v' '-o' 'conftest' '-g' '-O2' '-L/Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/gcc/lib' '-L.' '-mmacosx-version-min=11.5.0' '-asm_macosx_version_min=11.5' '-shared-libgcc' '-mtune=core2' /Volumes/SAS/sasbuild/local/macOS11/GNU_CC_CXX_9.5.0/gcc_9.5.0/bin/../libexec/gcc/x86_64-apple-darwin20.6.0/9.5.0/collect2 -syslibroot /Library/Developer/CommandLineTools/SDKs/MacOSX11.sdk/ -dynamic -arch x86_64 -macosx_version_min 11.5.0 -weak_reference_mismatches non-weak -o conftest -L/Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/gcc/lib -L. -L/Volumes/SAS/sasbuild/local/macOS11/GNU_CC_CXX_9.5.0/gcc_9.5.0/bin/../lib/gcc/x86_64-apple-darwin20.6.0/9.5.0 -L/Volumes/SAS/sasbuild/local/macOS11/GNU_CC_CXX_9.5.0/gcc_9.5.0/bin/../lib/gcc -L/Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/pgplot/lib -L/Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/tiff/lib -L/Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/netpbm/lib -L/Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/libtool/lib -L/Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/libpng/lib -L/Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/lesstif/lib -L/Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/jpeg/lib -L/Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/grace/lib -L/Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/qt-x11-free/lib -L/Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/fftw/lib -L/Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/cfitsio/lib -L/Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/gcc/lib -L/opt/X11/lib -L/Volumes/SAS/sasbuild/local/macOS11/GNU_CC_CXX_9.5.0/gcc_9.5.0/bin/../lib/gcc/x86_64-apple-darwin20.6.0/9.5.0/../../.. conftest.o -lgfortran -lgfortran -lcfitsio -lXaw -lXmu -lXt -lXext -lX11 -lpng -lz -lpgplot -lgfortran -lSystem -lgcc_ext.10.5 -lgcc -lquadmath -lm -lgcc_ext.10.5 -lgcc -lSystem -no_compact_unwind -v -idsym collect2 version 9.5.0 /usr/bin/ld -syslibroot /Library/Developer/CommandLineTools/SDKs/MacOSX11.sdk/ -dynamic -arch x86_64 -macosx_version_min 11.5.0 -weak_reference_mismatches non-weak -o conftest -L/Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/gcc/lib -L. -L/Volumes/SAS/sasbuild/local/macOS11/GNU_CC_CXX_9.5.0/gcc_9.5.0/bin/../lib/gcc/x86_64-apple-darwin20.6.0/9.5.0 -L/Volumes/SAS/sasbuild/local/macOS11/GNU_CC_CXX_9.5.0/gcc_9.5.0/bin/../lib/gcc -L/Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/pgplot/lib -L/Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/tiff/lib -L/Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/netpbm/lib -L/Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/libtool/lib -L/Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/libpng/lib -L/Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/lesstif/lib -L/Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/jpeg/lib -L/Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/grace/lib -L/Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/qt-x11-free/lib -L/Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/fftw/lib -L/Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/cfitsio/lib -L/Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/gcc/lib -L/opt/X11/lib -L/Volumes/SAS/sasbuild/local/macOS11/GNU_CC_CXX_9.5.0/gcc_9.5.0/bin/../lib/gcc/x86_64-apple-darwin20.6.0/9.5.0/../../.. conftest.o -lgfortran -lgfortran -lcfitsio -lXaw -lXmu -lXt -lXext -lX11 -lpng -lz -lpgplot -lgfortran -lSystem -lgcc_ext.10.5 -lgcc -lquadmath -lm -lgcc_ext.10.5 -lgcc -lSystem -no_compact_unwind -v @(#)PROGRAM:ld PROJECT:ld64-711 BUILD 21:57:11 Nov 17 2021 configured to support archs: armv6 armv7 armv7s arm64 arm64e arm64_32 i386 x86_64 x86_64h armv6m armv7k armv7m armv7em Library search paths: /Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/gcc/lib . /Volumes/SAS/sasbuild/local/macOS11/GNU_CC_CXX_9.5.0/gcc_9.5.0/lib/gcc/x86_64-apple-darwin20.6.0/9.5.0 /Volumes/SAS/sasbuild/local/macOS11/GNU_CC_CXX_9.5.0/gcc_9.5.0/lib/gcc /Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/pgplot/lib /Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/tiff/lib /Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/netpbm/lib /Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/libtool/lib /Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/libpng/lib /Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/lesstif/lib /Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/jpeg/lib /Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/grace/lib /Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/qt-x11-free/lib /Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/fftw/lib /Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/cfitsio/lib /Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/gcc/lib /opt/X11/lib /Volumes/SAS/sasbuild/local/macOS11/GNU_CC_CXX_9.5.0/gcc_9.5.0/lib /Library/Developer/CommandLineTools/SDKs/MacOSX11.sdk/usr/lib Framework search paths: /Library/Developer/CommandLineTools/SDKs/MacOSX11.sdk/System/Library/Frameworks/ configure:8510: $? = 0 configure:8513: result: yes configure:8531: checking for grep that handles long lines and -e configure:8589: result: /usr/bin/grep configure:8594: checking for egrep configure:8656: result: /usr/bin/grep -E configure:8661: checking for ANSI C header files configure:8681: gcc -c -g -O2 conftest.c >&5 configure:8681: $? = 0 configure:8754: gcc -o conftest -g -O2 conftest.c -lgfortran -lcfitsio -ldl -lm -L. >&5 configure:8754: $? = 0 configure:8754: ./conftest configure:8754: $? = 0 configure:8765: result: yes configure:8778: checking for sys/types.h configure:8778: gcc -c -g -O2 conftest.c >&5 configure:8778: $? = 0 configure:8778: result: yes configure:8778: checking for sys/stat.h configure:8778: gcc -c -g -O2 conftest.c >&5 configure:8778: $? = 0 configure:8778: result: yes configure:8778: checking for stdlib.h configure:8778: gcc -c -g -O2 conftest.c >&5 configure:8778: $? = 0 configure:8778: result: yes configure:8778: checking for string.h configure:8778: gcc -c -g -O2 conftest.c >&5 configure:8778: $? = 0 configure:8778: result: yes configure:8778: checking for memory.h configure:8778: gcc -c -g -O2 conftest.c >&5 configure:8778: $? = 0 configure:8778: result: yes configure:8778: checking for strings.h configure:8778: gcc -c -g -O2 conftest.c >&5 configure:8778: $? = 0 configure:8778: result: yes configure:8778: checking for inttypes.h configure:8778: gcc -c -g -O2 conftest.c >&5 configure:8778: $? = 0 configure:8778: result: yes configure:8778: checking for stdint.h configure:8778: gcc -c -g -O2 conftest.c >&5 configure:8778: $? = 0 configure:8778: result: yes configure:8778: checking for unistd.h configure:8778: gcc -c -g -O2 conftest.c >&5 configure:8778: $? = 0 configure:8778: result: yes configure:8792: checking for unistd.h configure:8792: result: yes configure:8807: checking for main in -lfftw3 configure:8826: gcc -o conftest -g -O2 conftest.c -lfftw3 -lgfortran -lcfitsio -ldl -lm -L. >&5 configure:8826: $? = 0 configure:8835: result: yes configure:8843: checking for main in -lfftw3f configure:8862: gcc -o conftest -g -O2 conftest.c -lfftw3f -lfftw3 -lgfortran -lcfitsio -ldl -lm -L. >&5 configure:8862: $? = 0 configure:8871: result: yes configure:8882: checking fftw3.h usability configure:8882: gcc -c -g -O2 conftest.c >&5 configure:8882: $? = 0 configure:8882: result: yes configure:8882: checking fftw3.h presence configure:8882: gcc -E conftest.c configure:8882: $? = 0 configure:8882: result: yes configure:8882: checking for fftw3.h configure:8882: result: yes configure:8893: checking for fftw3.h configure:8893: result: yes configure:8915: checking for main in -lgrace_np configure:8934: gcc -o conftest -g -O2 conftest.c -lgrace_np -lgfortran -lcfitsio -ldl -lm -L. >&5 configure:8934: $? = 0 configure:8943: result: yes configure:8954: checking grace_np.h usability configure:8954: gcc -c -g -O2 conftest.c >&5 configure:8954: $? = 0 configure:8954: result: yes configure:8954: checking grace_np.h presence configure:8954: gcc -E conftest.c configure:8954: $? = 0 configure:8954: result: yes configure:8954: checking for grace_np.h configure:8954: result: yes configure:8976: checking fitsio.h usability configure:8976: gcc -c -g -O2 conftest.c >&5 configure:8976: $? = 0 configure:8976: result: yes configure:8976: checking fitsio.h presence configure:8976: gcc -E conftest.c configure:8976: $? = 0 configure:8976: result: yes configure:8976: checking for fitsio.h configure:8976: result: yes configure:8992: checking cpgplot.h usability configure:8992: gcc -c -g -O2 conftest.c >&5 configure:8992: $? = 0 configure:8992: result: yes configure:8992: checking cpgplot.h presence configure:8992: gcc -E conftest.c configure:8992: $? = 0 configure:8992: result: yes configure:8992: checking for cpgplot.h configure:8992: result: yes configure:9003: checking for an ANSI C-conforming const configure:9069: gcc -c -g -O2 conftest.c >&5 configure:9069: $? = 0 configure:9076: result: yes configure:9084: checking for inline configure:9100: gcc -c -g -O2 conftest.c >&5 configure:9100: $? = 0 configure:9108: result: inline configure:9130: checking size of short configure:9135: gcc -o conftest -g -O2 conftest.c -lgfortran -lcfitsio -ldl -lm -L. >&5 configure:9135: $? = 0 configure:9135: ./conftest configure:9135: $? = 0 configure:9149: result: 2 configure:9163: checking size of int configure:9168: gcc -o conftest -g -O2 conftest.c -lgfortran -lcfitsio -ldl -lm -L. >&5 configure:9168: $? = 0 configure:9168: ./conftest configure:9168: $? = 0 configure:9182: result: 4 configure:9196: checking size of long configure:9201: gcc -o conftest -g -O2 conftest.c -lgfortran -lcfitsio -ldl -lm -L. >&5 configure:9201: $? = 0 configure:9201: ./conftest configure:9201: $? = 0 configure:9215: result: 8 configure:9225: checking whether byte ordering is bigendian configure:9240: gcc -c -g -O2 conftest.c >&5 configure:9240: $? = 0 configure:9285: gcc -c -g -O2 conftest.c >&5 configure:9285: $? = 0 configure:9303: gcc -c -g -O2 conftest.c >&5 conftest.c: In function 'main': conftest.c:37:4: error: unknown type name 'not'; did you mean 'ino_t'? 37 | not big endian | ^~~ | ino_t conftest.c:37:12: error: expected '=', ',', ';', 'asm' or '__attribute__' before 'endian' 37 | not big endian | ^~~~~~ configure:9303: $? = 1 configure: failed program was: | /* confdefs.h */ | #define PACKAGE_NAME "The XMM-Newton Science Analysis System" | #define PACKAGE_TARNAME "sas" | #define PACKAGE_VERSION "21.0.0" | #define PACKAGE_STRING "The XMM-Newton Science Analysis System 21.0.0" | #define PACKAGE_BUGREPORT "xmmhelp@sciops.esa.int" | #define PACKAGE_URL "https://www.cosmos.esa.int/web/xmm-newton/sas-news" | #define MACOSX 1 | #define YYTEXT_POINTER 1 | #define HAVE_LIBM 1 | #define HAVE_LIBDL 1 | #define HAVE_LIBSTDC__ 1 | #define HAVE_LIBCFITSIO 1 | #define HAVE_LIBGFORTRAN 1 | #define STDC_HEADERS 1 | #define HAVE_SYS_TYPES_H 1 | #define HAVE_SYS_STAT_H 1 | #define HAVE_STDLIB_H 1 | #define HAVE_STRING_H 1 | #define HAVE_MEMORY_H 1 | #define HAVE_STRINGS_H 1 | #define HAVE_INTTYPES_H 1 | #define HAVE_STDINT_H 1 | #define HAVE_UNISTD_H 1 | #define HAVE_UNISTD_H 1 | #define SIZEOF_SHORT 2 | #define SIZEOF_INT 4 | #define SIZEOF_LONG 8 | /* end confdefs.h. */ | #include | #include | | int | main () | { | #if BYTE_ORDER != BIG_ENDIAN | not big endian | #endif | | ; | return 0; | } configure:9431: result: no configure:9449: checking whether char is unsigned configure:9468: gcc -c -g -O2 conftest.c >&5 configure:9468: $? = 0 configure:9475: result: no configure:9489: checking for vprintf configure:9489: gcc -o conftest -g -O2 conftest.c -lgfortran -lcfitsio -ldl -lm -L. >&5 conftest.c:53:6: warning: conflicting types for built-in function 'vprintf'; expected 'int(const char *, __va_list_tag *)' [-Wbuiltin-declaration-mismatch] 53 | char vprintf (); | ^~~~~~~ conftest.c:41:1: note: 'vprintf' is declared in header '' 40 | # include 41 | #else configure:9489: $? = 0 configure:9489: result: yes configure:9495: checking for _doprnt configure:9495: gcc -o conftest -g -O2 conftest.c -lgfortran -lcfitsio -ldl -lm -L. >&5 Undefined symbols for architecture x86_64: "__doprnt", referenced from: _main in ccopLLhs.o ld: symbol(s) not found for architecture x86_64 collect2: error: ld returned 1 exit status configure:9495: $? = 1 configure: failed program was: | /* confdefs.h */ | #define PACKAGE_NAME "The XMM-Newton Science Analysis System" | #define PACKAGE_TARNAME "sas" | #define PACKAGE_VERSION "21.0.0" | #define PACKAGE_STRING "The XMM-Newton Science Analysis System 21.0.0" | #define PACKAGE_BUGREPORT "xmmhelp@sciops.esa.int" | #define PACKAGE_URL "https://www.cosmos.esa.int/web/xmm-newton/sas-news" | #define MACOSX 1 | #define YYTEXT_POINTER 1 | #define HAVE_LIBM 1 | #define HAVE_LIBDL 1 | #define HAVE_LIBSTDC__ 1 | #define HAVE_LIBCFITSIO 1 | #define HAVE_LIBGFORTRAN 1 | #define STDC_HEADERS 1 | #define HAVE_SYS_TYPES_H 1 | #define HAVE_SYS_STAT_H 1 | #define HAVE_STDLIB_H 1 | #define HAVE_STRING_H 1 | #define HAVE_MEMORY_H 1 | #define HAVE_STRINGS_H 1 | #define HAVE_INTTYPES_H 1 | #define HAVE_STDINT_H 1 | #define HAVE_UNISTD_H 1 | #define HAVE_UNISTD_H 1 | #define SIZEOF_SHORT 2 | #define SIZEOF_INT 4 | #define SIZEOF_LONG 8 | #define HAVE_VPRINTF 1 | /* end confdefs.h. */ | /* Define _doprnt to an innocuous variant, in case declares _doprnt. | For example, HP-UX 11i declares gettimeofday. */ | #define _doprnt innocuous__doprnt | | /* System header to define __stub macros and hopefully few prototypes, | which can conflict with char _doprnt (); below. | Prefer to if __STDC__ is defined, since | exists even on freestanding compilers. */ | | #ifdef __STDC__ | # include | #else | # include | #endif | | #undef _doprnt | | /* Override any GCC internal prototype to avoid an error. | Use char because int might match the return type of a GCC | builtin and then its argument prototype would still apply. */ | #ifdef __cplusplus | extern "C" | #endif | char _doprnt (); | /* The GNU C library defines this for functions which it implements | to always fail with ENOSYS. Some functions are actually named | something starting with __ and the normal name is an alias. */ | #if defined __stub__doprnt || defined __stub____doprnt | choke me | #endif | | int | main () | { | return _doprnt (); | ; | return 0; | } configure:9495: result: no configure:9525: checking qwidget.h usability configure:9525: g++ -c -DGFORTRAN -DGNUCC conftest.cpp >&5 configure:9525: $? = 0 configure:9525: result: yes configure:9525: checking qwidget.h presence configure:9525: g++ -E conftest.cpp configure:9525: $? = 0 configure:9525: result: yes configure:9525: checking for qwidget.h configure:9525: result: yes configure:9533: checking qdom.h usability configure:9533: g++ -c -DGFORTRAN -DGNUCC conftest.cpp >&5 configure:9533: $? = 0 configure:9533: result: yes configure:9533: checking qdom.h presence configure:9533: g++ -E conftest.cpp configure:9533: $? = 0 configure:9533: result: yes configure:9533: checking for qdom.h configure:9533: result: yes configure:9541: checking for main in -lqt configure:9560: g++ -o conftest -DGFORTRAN -DGNUCC conftest.cpp -lqt -lgfortran -lcfitsio -ldl -lm -L. >&5 configure:9560: $? = 0 configure:9569: result: yes configure:9584: checking whether your environment sets QTDIR configure:9592: result: yes configure:9596: WARNING: QTDIR is /Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/qt-x11-free configure:9621: checking for moc configure:9639: found /Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/qt-x11-free/bin/moc configure:9652: result: /Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/qt-x11-free/bin/moc configure:9667: checking if a small Qt program can be compiled and linked configure:9691: g++ -o conftest -DGFORTRAN -DGNUCC conftest.cpp -lqt -lgfortran -lcfitsio -ldl -lm -L. >&5 configure:9691: $? = 0 configure:9692: result: yes configure:9702: checking the version of Qt configure:9714: g++ -o conftest -DGFORTRAN -DGNUCC conftest.cpp -lqt -lgfortran -lcfitsio -ldl -lm -L. >&5 configure:9717: $? = 0 configure:9721: result: 3.3.8b configure:9749: checking longnam.h usability configure:9749: gcc -c -g -O2 conftest.c >&5 configure:9749: $? = 0 configure:9749: result: yes configure:9749: checking longnam.h presence configure:9749: gcc -E conftest.c configure:9749: $? = 0 configure:9749: result: yes configure:9749: checking for longnam.h configure:9749: result: yes configure:9758: checking the version of cfitsio configure:9771: gcc -o conftest -g -O2 conftest.c -lgfortran -lcfitsio -ldl -lm -L. >&5 configure:9774: $? = 0 configure:9778: result: 4.000 configure:9793: checking for ffpunt configure:9793: gcc -o conftest -g -O2 conftest.c -lgfortran -lcfitsio -ldl -lm -L. >&5 configure:9793: $? = 0 configure:9793: result: yes configure:9793: checking for ffgunt configure:9793: gcc -o conftest -g -O2 conftest.c -lgfortran -lcfitsio -ldl -lm -L. >&5 configure:9793: $? = 0 configure:9793: result: yes configure:9793: checking for ffgnrw configure:9793: gcc -o conftest -g -O2 conftest.c -lgfortran -lcfitsio -ldl -lm -L. >&5 configure:9793: $? = 0 configure:9793: result: yes configure:9793: checking for ffgncl configure:9793: gcc -o conftest -g -O2 conftest.c -lgfortran -lcfitsio -ldl -lm -L. >&5 configure:9793: $? = 0 configure:9793: result: yes configure:9805: checking for sin configure:9805: gcc -o conftest -g -O2 conftest.c -lgfortran -lcfitsio -ldl -lm -L. >&5 conftest.c:59:6: warning: conflicting types for built-in function 'sin'; expected 'double(double)' [-Wbuiltin-declaration-mismatch] 59 | char sin (); | ^~~ conftest.c:47:1: note: 'sin' is declared in header '' 46 | # include 47 | #else configure:9805: $? = 0 configure:9805: result: yes configure:9961: creating ./config.status ## ---------------------- ## ## Running config.status. ## ## ---------------------- ## This file was extended by The XMM-Newton Science Analysis System config.status 21.0.0, which was generated by GNU Autoconf 2.69. Invocation command line was CONFIG_FILES = CONFIG_HEADERS = CONFIG_LINKS = CONFIG_COMMANDS = $ ./config.status on xmac01n.iuser.lan config.status:997: creating Make.include config.status:997: creating Make.include.perl config.status:997: creating SasVersion.h config.status:997: creating sas-setup.sh config.status:997: creating sas-setup.csh config.status:997: creating sas.environment config.status:997: creating packagedetails.html config.status:997: creating config.h ## ---------------- ## ## Cache variables. ## ## ---------------- ## ac_cv_build=x86_64-apple-darwin20.6.0 ac_cv_c_bigendian=no ac_cv_c_char_unsigned=no ac_cv_c_compiler_gnu=yes ac_cv_c_const=yes ac_cv_c_inline=inline ac_cv_cxx_compiler_gnu=yes ac_cv_env_CCC_set= ac_cv_env_CCC_value= ac_cv_env_CC_set= ac_cv_env_CC_value= ac_cv_env_CFLAGS_set= ac_cv_env_CFLAGS_value= ac_cv_env_CPPFLAGS_set= ac_cv_env_CPPFLAGS_value= ac_cv_env_CPP_set= ac_cv_env_CPP_value= ac_cv_env_CXXCPP_set= ac_cv_env_CXXCPP_value= ac_cv_env_CXXFLAGS_set= ac_cv_env_CXXFLAGS_value= ac_cv_env_CXX_set= ac_cv_env_CXX_value= ac_cv_env_LDFLAGS_set= ac_cv_env_LDFLAGS_value= ac_cv_env_LIBS_set= ac_cv_env_LIBS_value= ac_cv_env_XMKMF_set= ac_cv_env_XMKMF_value= ac_cv_env_YACC_set= ac_cv_env_YACC_value= ac_cv_env_YFLAGS_set= ac_cv_env_YFLAGS_value= ac_cv_env_build_alias_set= ac_cv_env_build_alias_value= ac_cv_env_host_alias_set= ac_cv_env_host_alias_value= ac_cv_env_target_alias_set= ac_cv_env_target_alias_value= ac_cv_file__Applications_Safari_app=yes ac_cv_func__doprnt=no ac_cv_func_connect=yes ac_cv_func_ffgncl=yes ac_cv_func_ffgnrw=yes ac_cv_func_ffgunt=yes ac_cv_func_ffpunt=yes ac_cv_func_gethostbyname=yes ac_cv_func_sin=yes ac_cv_func_vprintf=yes ac_cv_have_x='have_x=yes ac_x_includes='\'''\'' ac_x_libraries='\'''\''' ac_cv_header_cpgplot_h=yes ac_cv_header_fftw3_h=yes ac_cv_header_fitsio_h=yes ac_cv_header_grace_np_h=yes ac_cv_header_inttypes_h=yes ac_cv_header_longnam_h=yes ac_cv_header_memory_h=yes ac_cv_header_qdom_h=yes ac_cv_header_qwidget_h=yes ac_cv_header_stdc=yes ac_cv_header_stdint_h=yes ac_cv_header_stdlib_h=yes ac_cv_header_string_h=yes ac_cv_header_strings_h=yes ac_cv_header_sys_stat_h=yes ac_cv_header_sys_types_h=yes ac_cv_header_unistd_h=yes ac_cv_host=x86_64-apple-darwin20.6.0 ac_cv_lib_X11_main=yes ac_cv_lib_Xaw_main=yes ac_cv_lib_Xext_main=yes ac_cv_lib_Xmu_main=yes ac_cv_lib_Xt_main=yes ac_cv_lib_cfitsio_main=yes ac_cv_lib_cpgplot_main=yes ac_cv_lib_dl_main=yes ac_cv_lib_fftw3_main=yes ac_cv_lib_fftw3f_main=yes ac_cv_lib_gfortran_main=yes ac_cv_lib_grace_np_main=yes ac_cv_lib_lex=-ll ac_cv_lib_m_main=yes ac_cv_lib_nsl_main=no ac_cv_lib_qt_main=yes ac_cv_lib_socket_main=no ac_cv_lib_stdcpp_main=yes ac_cv_objext=o ac_cv_path_ECHO=/Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/coreutils/bin/echo ac_cv_path_EGREP='/usr/bin/grep -E' ac_cv_path_GFORTRANPATH=/Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/gcc/bin/gfortran ac_cv_path_GNUAR=/usr/bin/ar ac_cv_path_GNUCCPATH=/Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/gcc/bin/gcc ac_cv_path_GNUCXXPATH=/Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/gcc/bin/g++ ac_cv_path_GNUFIND=/Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/findutils/bin/find ac_cv_path_GNUMAKE=/Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/make/bin/make ac_cv_path_GNUTAR=/Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/tar/bin/tar ac_cv_path_GREP=/usr/bin/grep ac_cv_path_GZIP=/usr/bin/gzip ac_cv_path_MKDIR=/Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/coreutils/bin/mkdir ac_cv_path_MOC=/Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/qt-x11-free/bin/moc ac_cv_path_PYTHON=/usr/bin/python ac_cv_path_XMGR_PATH=/Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/grace/bin/xmgrace ac_cv_path_install='/Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/coreutils/bin/install -c' ac_cv_prog_CPP='gcc -E' ac_cv_prog_CXXCPP='g++ -E' ac_cv_prog_DVIPDF=dvipdf ac_cv_prog_DVIPS=dvips ac_cv_prog_FVERSION=fversion ac_cv_prog_GFORTRAN=gfortran ac_cv_prog_LATEX2HTML=latex2html ac_cv_prog_LATEX=latex ac_cv_prog_LEX=flex ac_cv_prog_PATCH=patch ac_cv_prog_PAUX=yes ac_cv_prog_SAODISPLAY=ds9 ac_cv_prog_TEX=tex ac_cv_prog_XMGR=xmgrace ac_cv_prog_XMGRBAT=gracebat ac_cv_prog_XPAGET=xpaget ac_cv_prog_YACC='bison -y' ac_cv_prog_ac_ct_CC=gcc ac_cv_prog_ac_ct_CXX=g++ ac_cv_prog_ac_ct_RANLIB=ranlib ac_cv_prog_cc_c89= ac_cv_prog_cc_g=yes ac_cv_prog_cxx_g=yes ac_cv_prog_lex_root=lex.yy ac_cv_prog_lex_yytext_pointer=yes ac_cv_prog_make_make_set=yes ac_cv_sizeof_int=4 ac_cv_sizeof_long=8 ac_cv_sizeof_short=2 ac_cv_target=x86_64-apple-darwin20.6.0 ## ----------------- ## ## Output variables. ## ## ----------------- ## BIBINPUTS='' BUILDER='sasbuild' CC='gcc ' CCVERSION='9.5.0' CC_PIC_FLAG='-fPIC' CFITSIOV='4.000' CFLAGS='-g -O2' CPATH='/Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/pgplot/include:/Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/tiff/include:/Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/netpbm/include:/Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/libtool/include:/Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/libpng/include:/Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/lesstif/include:/Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/jpeg/include:/Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/grace/include:/Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/qt-x11-free/include:/Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/fftw/include:/Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/cfitsio/include:/opt/X11/include' CPLUS_INCLUDE_PATH='obsolete__use_CPATH_instead' CPP='gcc -E ' CPPFLAGS='' CXX='g++' CXXCPP='g++ -E' CXXFLAGS=' -DGFORTRAN -DGNUCC' CXXVERSION='9.5.0' C_INCLUDE_PATH='obsolete__use_CPATH_instead' DEBUG='yes' DEFS='-DHAVE_CONFIG_H' DIRECTORY='reltrack_rel_9.5.0_build' DVIPDF='dvipdf' DVIPS='dvips' DVIPS_VERSION='2022.1' DYLD_LIBRARY_PATH='/Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/pgplot/lib:/Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/tiff/lib:/Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/netpbm/lib:/Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/libtool/lib:/Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/libpng/lib:/Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/lesstif/lib:/Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/jpeg/lib:/Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/grace/lib:/Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/qt-x11-free/lib:/Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/fftw/lib:/Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/cfitsio/lib:/Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/headas/architecture/lib:/Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/gcc/lib' ECHO='/Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/coreutils/bin/echo' ECHO_C='' ECHO_N='-n' ECHO_T='' EGREP='/usr/bin/grep -E' EXEEXT='' F90='gfortran' F90OLEVEL='2' F90VERSION='9.5.0' F90_PIC_FLAG='-fPIC' FFTW3_DOUBLE_INCS='' FFTW3_SINGLE_INCS='' FTOOLS='/Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/headas/architecture' FTOOLS_REL='08Apr2022_V6.30.1' FVERSION='fversion' GFORTRAN='gfortran' GFORTRANPATH='/Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/gcc/bin/gfortran' GFORTRANSITE='/Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/gcc' GFORTRANVERSION='9.5.0' GFORTRANVERSION_MAJOR='9' GNUAR='/usr/bin/ar' GNUAR_VERSION='usage: ar -d [-TLsv] archive file ...' GNUCCPATH='/Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/gcc/bin/gcc' GNUCXXPATH='/Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/gcc/bin/g++' GNUFIND='/Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/findutils/bin/find' GNUMAKE='/Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/make/bin/make' GNUTAR='/Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/tar/bin/tar' GNU_FIND='find (GNU findutils) 4.7.0' GNU_MAKE='GNU Make 4.3' GNU_TAR='tar (GNU tar) 1.32' GRACE_INCS='' GRACE_LIBS='-lgrace_np' GREP='/usr/bin/grep' GZIP='/usr/bin/gzip' HEADAS='/Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/headas/architecture' HOSTNAME='xmac01n.iuser.lan' INCS='-I.' INSTALL_DATA='${INSTALL} -m 644' INSTALL_PROGRAM='${INSTALL}' INSTALL_SCRIPT='${INSTALL}' LATEX2HTML='2022.2 (Released July 1, 2022)' LATEX='latex' LDFLAGS='' LD_LIBRARY_PATH='/Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/headas/architecture/lib' LEX='flex' LEXLIB='-ll' LEX_OUTPUT_ROOT='lex.yy' LHEASOFT='/Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/headas/architecture' LIBOBJS='' LIBRARY_PATH='/Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/pgplot/lib:/Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/tiff/lib:/Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/netpbm/lib:/Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/libtool/lib:/Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/libpng/lib:/Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/lesstif/lib:/Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/jpeg/lib:/Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/grace/lib:/Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/qt-x11-free/lib:/Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/fftw/lib:/Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/cfitsio/lib:/Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/gcc/lib:/opt/X11/lib' LIBS='-lgfortran -lcfitsio -ldl -lm -L. ' LIBS_LDLIBS='' LIBS_PATH='' LN_S='ln -s' LTLIBOBJS='' MATH_LIBS='' MKDIR='/Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/coreutils/bin/mkdir' MOC='/Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/qt-x11-free/bin/moc' OBJEXT='o' OLEVEL='2' OPTIMIZATION='no' PACKAGE_BUGREPORT='xmmhelp@sciops.esa.int' PACKAGE_NAME='The XMM-Newton Science Analysis System' PACKAGE_STRING='The XMM-Newton Science Analysis System 21.0.0' PACKAGE_TARNAME='sas' PACKAGE_URL='https://www.cosmos.esa.int/web/xmm-newton/sas-news' PACKAGE_VERSION='21.0.0' PATCH='patch' PATH='/Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/latex2html/bin:/Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/texlive/bin/universal-darwin:/Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/tiff/bin:/Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/netpbm/bin:/Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/libtool/bin:/Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/libpng/bin:/Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/lesstif/bin:/Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/jpeg/bin:/Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/grace/bin:/Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/qt-x11-free/bin:/Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/fftw/bin:/Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/automake/bin:/Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/autoconf/bin:/Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/tar/bin:/Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/sed/bin:/Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/make/bin:/Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/ghostscript/bin:/Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/findutils/bin:/Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/coreutils/bin:/Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/wcstools/bin:/Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/ds9/bin:/Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/perl/bin:/Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/headas/architecture/bin:/Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/gcc/bin:/opt/X11/bin:/usr/local/bin:/usr/bin:/bin' PATH_SEPARATOR=':' PAUX='yes' PERL5LIB='/Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/perl/lib/site_perl:/Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/headas/architecture/lib/perl:/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/headas/architecture/lib/perl' PERL='/Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/perl/bin/perl' PERLLIB='/Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/headas/architecture/lib/perl:/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/headas/architecture/lib/perl' PERLVERSION='5.34.1' PERL_ARCH_NAME='darwin-2level' PERL_INCS=' -I/sasbuild/local/macOS11/GNU_CC_CXX_9.5.0/perl_5.34.1/lib/5.34.1/darwin-2level/CORE ' PERL_LDOPTS=' -mmacosx-version-min=11.6 -fstack-protector-strong -L/sasbuild/local/macOS11/GNU_CC_CXX_9.5.0/perl_5.34.1/lib/5.34.1/darwin-2level/CORE -lperl' PGPLOT_DIR='/Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/pgplot' PGPLOT_INCS='' PGPLOT_LIBS='-lgfortran -lcpgplot -lpng -lz -lpgplot' PROCESSOR='x86_64' PROFILE='no' PYTHON='/usr/bin/python' PYTHONPATH='/usr/local/lib/python:/Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/headas/architecture/lib/python:/Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/headas/architecture/lib:/usr/local/lib/python3.10:/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/headas/architecture/lib/python:/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/headas/architecture/lib' PYTHONVER='2.7.16' QTDIR='/Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/qt-x11-free' QTVERSION='3.3.8b' QT_INCS='-I/Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/qt-x11-free/include' QT_LIBS='-L/Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/qt-x11-free/lib -lqt -framework Security' RANLIB='ranlib' RELEASE='xmmsas_20230202_1933' RELEASETYPE='user' RPATH='yes' SAODISPLAY='ds9' SASCFLAGS='-Wall -fno-common' SASCXXFLAGS='-Wall -DGFORTRAN -fno-common' SASF90FLAGS='-fimplicit-none -fno-range-check -DGFORTRAN' SASFFLAGS='-fno-range-check -DGFORTRAN' SASLDFLAGS='' SAS_AKA='21.0.0' SAS_BROWSER='open -a Safari' SAS_COMPILATION_DATE='Sun Feb 12 21:08:21 CET 2023' SAS_COMPILATION_HOST='xmac01n.iuser.lan' SAS_COMPILATION_USER='sasbuild' SAS_DIR='/Volumes/SAS/sasbuild/build/macOS11/GNU_CC_CXX_9.5.0/reltrack_rel_9.5.0_build' SAS_PERL='/Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/perl/bin/perl' SAS_RELEASE='xmmsas_20230202_1933' SET_MAKE='' SHARED='yes' SHAREDVERSION='yes' SHARED_LIBS_FLAGS='-bind_at_load -dynamiclib -single_module -undefined dynamic_lookup -Wl,-install_name,@loader_path/../lib/$@' SHELL='/bin/sh' SLOPPY='yes' SO_SUFFIX='dylib' STRICT='yes' TARGET_OS='macOS-11.7' TEX='tex' TEXINPUTS='/Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/latex2html/texinputs' TEX_VERSION='' TRACE='no' VERBOSE='no' XINCLUDES='# no special path needed' XLIBSW='-lX11' XMGR='xmgrace' XMGRBAT='gracebat' XMGR_PATH='/Volumes/SAS/sasbuild/local/xmac01n/GNU_CC_CXX_9.5.0/grace/bin/xmgrace' XMGR_VERSION='Grace-5.1.25' XMKMF='' XPAGET='xpaget' X_CFLAGS='' X_LIBS=' -lXaw -lXmu -lXt -lXext -lX11 ' YACC='bison -y' YFLAGS='' ac_ct_CC='gcc' ac_ct_CXX='g++' bindir='${exec_prefix}/bin' build='x86_64-apple-darwin20.6.0' build_alias='' build_cpu='x86_64' build_os='darwin20.6.0' build_vendor='apple' datadir='${datarootdir}' datarootdir='${prefix}/share' docdir='${datarootdir}/doc/${PACKAGE_TARNAME}' dvidir='${docdir}' exec_prefix='${prefix}' host='x86_64-apple-darwin20.6.0' host_alias='' host_cpu='x86_64' host_os='darwin20.6.0' host_vendor='apple' htmldir='${docdir}' includedir='${prefix}/include' infodir='${datarootdir}/info' libdir='${exec_prefix}/lib' libexecdir='${exec_prefix}/libexec' localedir='${datarootdir}/locale' localstatedir='${prefix}/var' mandir='${datarootdir}/man' oldincludedir='/usr/include' pdfdir='${docdir}' prefix='/usr/local' program_transform_name='s,x,x,' psdir='${docdir}' sbindir='${exec_prefix}/sbin' sharedstatedir='${prefix}/com' sysconfdir='${prefix}/etc' target='x86_64-apple-darwin20.6.0' target_alias='' target_cpu='x86_64' target_os='darwin20.6.0' target_vendor='apple' ## ----------- ## ## confdefs.h. ## ## ----------- ## /* confdefs.h */ #define PACKAGE_NAME "The XMM-Newton Science Analysis System" #define PACKAGE_TARNAME "sas" #define PACKAGE_VERSION "21.0.0" #define PACKAGE_STRING "The XMM-Newton Science Analysis System 21.0.0" #define PACKAGE_BUGREPORT "xmmhelp@sciops.esa.int" #define PACKAGE_URL "https://www.cosmos.esa.int/web/xmm-newton/sas-news" #define MACOSX 1 #define YYTEXT_POINTER 1 #define HAVE_LIBM 1 #define HAVE_LIBDL 1 #define HAVE_LIBSTDC__ 1 #define HAVE_LIBCFITSIO 1 #define HAVE_LIBGFORTRAN 1 #define STDC_HEADERS 1 #define HAVE_SYS_TYPES_H 1 #define HAVE_SYS_STAT_H 1 #define HAVE_STDLIB_H 1 #define HAVE_STRING_H 1 #define HAVE_MEMORY_H 1 #define HAVE_STRINGS_H 1 #define HAVE_INTTYPES_H 1 #define HAVE_STDINT_H 1 #define HAVE_UNISTD_H 1 #define HAVE_UNISTD_H 1 #define SIZEOF_SHORT 2 #define SIZEOF_INT 4 #define SIZEOF_LONG 8 #define HAVE_VPRINTF 1 #define HAVE_LIBQT 1 #define HAVE_FFPUNT 1 #define HAVE_FFGUNT 1 #define HAVE_FFGNRW 1 #define HAVE_FFGNCL 1 configure: exit 0